DataSheetWiki


ACPL-3130 fiches techniques PDF

AVAGO - Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler

Numéro de référence ACPL-3130
Description Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
Fabricant AVAGO 
Logo AVAGO 





1 Page

No Preview Available !





ACPL-3130 fiche technique
ACPL-3130/J313, ACNW3130
Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-3130 contains a GaAsP LED while the ACPL-
J313 and the ANCW3130 contain an AlGaAs LED. The LED
is optically coupled to an integrated circuit with a power
output stage. These optocouplers are ideally suited for
driving power IGBTs and MOSFETs used in motor control
inverter applications. The high operating voltage range
of the output stage provides the drive voltages required
by gate controlled devices. The voltage and current
supplied by these optocouplers make them ideally suited
for directly driving IGBTs with ratings up to 1200 V/100 A.
For IGBTs with higher ratings, the ACPL-3130 series can be
used to drive a discrete power stage which drives the IGBT
gate. The ANCW3130 has the highest insulation voltage of
VIORM = 1414 Vpeak in the IEC/EN/DIN EN 60747-5-2. The
ACPL-J313 has an insulation voltage of VIORM = 891 Vpeak
and the VIORM = 630 Vpeak is also available with the ACPL-
3130 (Option 060).
Functional Diagram
N/C 1
8 VCC
ANODE 2
7 VO
CATHODE 3
6 VO
N/C 4
SHIELD
5 VEE
ACPL-3130 and ACPL-J313
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
8 VCC
7 VO
6 N/C
5 VEE
Features
High speed response.
Very high CMR.
Bootstrappable supply current.
Safety Approval (pending):
UL Recognized
- 3750 Vrms for 1 min. for ACPL-3130/J313.
- 5000 Vrms for 1 min. For ACNW3130
CSA Approval
IEC/EN/DIN EN 60747-5-2 Approved
- VIORM = 630 Vpeak for ACPL-3130 (Option 060)
- VIORM = 891 Vpeak for ACPL-J313
- VIORM = 1414 Vpeak for ACNW3130
Specifications
2.5 A maximum peak output current.
2.0 A minimum peak output current.
40 kV/µs minimum Common Mode Rejection (CMR) at
VCM = 1500 V
0.5V maximum low level output voltage (VOL) eliminates
need for negative gate drive
ICC = 5 mA maximum supply current
Under Voltage Lock-Out protection (UVLO) with
hysteresis
Wide operating VCC range: 15 to 30 Volts
500 ns maximum switching speeds
Industrial temperature range: -40°C to 100°C
Applications
IGBT/MOSFET gate drive
AC/Brushless DC motor drives
Industrial inverters
Switching Power Supplies (SPS)
ACNW3130
Note: A 0.1 µF bypass capacitor must be connected between pins VCC and VEE.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.


PagesPages 20
Télécharger [ ACPL-3130 ]


Fiche technique recommandé

No Description détaillée Fabricant
ACPL-3130 Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler AVAGO
AVAGO

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche