DataSheet.es    


PDF TC74VHC132FK Data sheet ( Hoja de datos )

Número de pieza TC74VHC132FK
Descripción QUAD 2-INPUT SCHMITT NAND GATE
Fabricantes Toshiba 
Logotipo Toshiba Logotipo



Hay una vista previa y un enlace de descarga de TC74VHC132FK (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! TC74VHC132FK Hoja de datos, Descripción, Manual

TC74VHC132F/FN/FT/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHC132F,TC74VHC132FN,TC74VHC132FT,TC74VHC132FK
Quad 2-Input Schmitt NAND Gate
The TC74VHC132 is an advanced high speed CMOS 2-INPUT
SCHMITT NAND GATE fabricated with silicon gate C2MOS
technology.
It achieves the high speed operation similar to equivalent
Bipolar Schottky TTL while maintaining the CMOS low power
dissipation.
Pin configuration and function are the same as the
TC74VHC00 but the inputs have hysteresis and with its schmitt
trigger function, the TC74VHC132 can be used as a line receivers
which will receive slow input signals.
An input protection circuit ensures that 0 to 5.5 V can be
applied to the input pins without regard to the supply voltage.
This device can be used to interface 5 to 3 V systems and two
supply systems such as battery back up.
This circuit prevents device destruction due to mismatched
supply and input voltages.
Features
High speed: tpd = 4.9 ns (typ.) at VCC = 5 V
Low power dissipation: ICC = 2 µA (max) at Ta = 25°C
Power down protection is provided on all inputs.
Balanced propagation delays: tpLH ∼− tpHL
Wide operating voltage range: VCC (opr) = 2 to 5.5 V
Low noise: VOLP = 0.8 V (max)
Pin and function compatible with 74ALS132
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC74VHC132F
TC74VHC132FN
TC74VHC132FT
TC74VHC132FK
Weight
SOP14-P-300-1.27A
: 0.18 g (typ.)
SOP14-P-300-1.27
: 0.18 g (typ.)
SOL14-P-150-1.27
: 0.12 g (typ.)
TSSOP14-P-0044-0.65A : 0.06 g (typ.)
VSSOP14-P-0030-0.50 : 0.02 g (typ.)
1 2006-02-01

1 page




TC74VHC132FK pdf
TC74VHC132F/FN/FT/FK
Noise Characteristics (input: tr = tf = 3 ns)
Characteristics
Symbol
Test Condition
Quiet output maximum dynamic VOL
Quiet output minimum dynamic VOL
Minimum high level dynamic input voltage
Maximum low level dynamic input voltage
VOLP
VOLV
VIHD
VILD
CL = 50 pF
CL = 50 pF
CL = 50 pF
CL = 50 pF
VCC (V)
5.0
5.0
5.0
5.0
Ta = 25°C
Typ. Max
0.3 0.8
0.3 0.8
3.5
1.5
Unit
V
V
V
V
Input Equivalent Circuit
INPUT
5 2006-02-01

5 Page





TC74VHC132FK arduino
TC74VHC132F/FN/FT/FK
Note: Lead (Pb)-Free Packages
SOP14-P-300-1.27A SOL14-P-150-1.27 TSSOP14-P-0044-0.65A VSSOP14-P-0030-0.50
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice. 021023_D
060116EBA
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc. 021023_A
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk. 021023_B
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others. 021023_C
The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E
11 2006-02-01

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet TC74VHC132FK.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TC74VHC132FQUAD 2-INPUT SCHMITT NAND GATEToshiba
Toshiba
TC74VHC132FKQUAD 2-INPUT SCHMITT NAND GATEToshiba
Toshiba
TC74VHC132FNQUAD 2-INPUT SCHMITT NAND GATEToshiba
Toshiba
TC74VHC132FSQUAD 2-INPUT SCHMITT NAND GATEToshiba
Toshiba

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar