|
|
PDF BFL4001 Data sheet ( Hoja de datos )
| Número de pieza | BFL4001 | |
| Descripción | N-Channel Silicon MOSFET | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BFL4001 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : ENA1638A
BFL4001
SANYO Semiconductors
DATA SHEET
BFL4001
N-Channel Silicon MOSFET
General-Purpose Switching Device
Applications
Features
• Low ON-resistance
• Avalanche resistance guarantee
• High-speed switching
• 10V drive
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Drain-to-Source Voltage
VDSS
900 V
Gate-to-Source Voltage
VGSS
±30 V
Drain Current (DC)
IDc*1
IDpack*2
Limited only by maximum temperature Tch=150°C
Tc=25°C (SANYO’s ideal heat dissipation condition)*3
6.5 A
4.1 A
Drain Current (Pulse)
IDP PW≤10μs, duty cycle≤1%
13 A
Allowable Power Dissipation
PD Tc=25°C (SANYO’s ideal heat dissipation condition)*3
2.0 W
37 W
Channel Temperature
Tch
150 °C
Storage Temperature
Tstg
--55 to +150
°C
Avalanche Energy (Single Pulse) *4
EAS
223 mJ
Avalanche Current *5
IAV
6.5 A
Note :*1 Shows chip capability
*2 Package limited
*3 SANYO’s condition is radiation from backside.
The method is applying silicone grease to the backside of the device and attaching the device to water-cooled radiator made of aluminium.
*4 VDD=50V, L=10mH, IAV=6.5A
*5 L≤10mH, single pulse
Package Dimensions
unit : mm (typ)
7528-001
10.16
3.18
4.7
2.54
Product & Package Information
• Package
: TO-220F-3FS
• JEITA, JEDEC
: SC-67
• Minimum Packing Quantity : 50 pcs./magazine
Marking
Electrical Connection
2
1.47 MAX
0.8
123
2.54 2.54
FL4001
LOT No.
1
2.76
0.5 1 : Gate
2 : Drain
3 : Source
SANYO : TO-220F-3FS
3
http://semicon.sanyo.com/en/network
22912 TKIM TC-00002729/31010QB TK IM TC-00002256 No.A1638-1/5
1 page  
BFL4001
Note on usage : Since the BFL4001 is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of February, 2012. Specifications and information herein are subject
to change without notice.
PS No.A1638-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet BFL4001.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BFL4001 | N-Channel Silicon MOSFET | Sanyo |
| BFL4001 | N-Channel Power MOSFET / Transistor |  ON Semiconductor |
| BFL4004 | N-Channel Silicon MOSFET | Sanyo |
| BFL4004 | N-Channel Power MOSFET / Transistor | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |