DataSheetWiki


NCP6133 fiches techniques PDF

ON Semiconductor - Dual Output 1/2/3 Phase +1/0 Phase Controller

Numéro de référence NCP6133
Description Dual Output 1/2/3 Phase +1/0 Phase Controller
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





NCP6133 fiche technique
NCP6133
Advance Information
Dual Output 1/2/3 Phase
+1/0 Phase Controller with
Single SVID Interface for
Desktop and Notebook CPU
Applications
The NCP6133 dual output 1/2/3 phase plus 1/0 buck solution is
optimized for Intel VR12 compatible CPUs. The controller combines
true differential voltage sensing, differential inductor DCR current
sensing, input voltage feedforward, and adaptive voltage positioning
to provide accurately regulated power for both Desktop and Notebook
applications. The control system is based on DualEdge pulsewidth
modulation (PWM) combined with DCR current sensing providing
the fastest initial response to dynamic load events and reduced system
cost. It also sheds to single phase during light load operation and can
auto frequency scale in light load while maintaining excellent
transient performance.
Dual high performance operational error amplifiers are provided to
simplify compensation of the system. Patented Dynamic Reference
Injection further simplifies loop compensation by eliminating the need
to compromise between closedloop transient response and Dynamic
VID performance. Patented Total Current Summing provides highly
accurate current monitoring for droop and digital current monitoring.
http://onsemi.com
MARKING
DIAGRAM
1 52
QFN52
CASE 485BE
NCP6133
AWLYYWWG
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = PbFree Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 28 of this data sheet.
Features
Meets Intel VR12/IMVP7 Specifications
Current Mode Dual Edge Modulation for Fastest Initial
Response to Transient Loading
Dual High Performance Operational Error Amplifier
One Digital Soft Start Ramp for Both Rails
Dynamic Reference Injection
Accurate Total Summing Current Amplifier
DAC with Droop Feedforward Injection
Dual High Impedance Differential Voltage and Total
Current Sense Amplifiers
PhasetoPhase Dynamic Current Balancing
“Lossless” DCR Current Sensing for Current Balancing
Summed Thermally Compensated Inductor Current
Sensing for Droop
True Differential Current Balancing Sense Amplifiers
for Each Phase
Adaptive Voltage Positioning (AVP)
Switching Frequency Range of 200 kHz – 1.0 MHz
Startup into PreCharged Loads While Avoiding False
OVP
Power Saving Phase Shedding
Vin Feed Forward Ramp Slope
Pin Programming for Internal SVID Parameters
Over Voltage Protection (OVP) and Under Voltage
Protection (UVP)
Over Current Protection (OCP)
Dual Power Good Output with Internal Delays
These Devices are PbFree and are RoHS Compliant
Applications
Desktop & Notebook Processors
Server Processors and Memory Power
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
© Semiconductor Components Industries, LLC, 2013
November, 2013 Rev. P2
1
Publication Order Number:
NCP6133/D

PagesPages 29
Télécharger [ NCP6133 ]


Fiche technique recommandé

No Description détaillée Fabricant
NCP6132 Dual Output 3 Phase & 2 Phase Controller ON Semiconductor
ON Semiconductor
NCP6132A Dual Output 3 Phase & 2 Phase Controller ON Semiconductor
ON Semiconductor
NCP6132B Dual Output 3 Phase & 2 Phase Controller ON Semiconductor
ON Semiconductor
NCP6133 Dual Output 1/2/3 Phase +1/0 Phase Controller ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche