|
|
PDF 74AHCT138 Data sheet ( Hoja de datos )
| Número de pieza | 74AHCT138 | |
| Descripción | 3 TO 8 LINE DECODER DEMULTIPLEXER | |
| Fabricantes | Diodes | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74AHCT138 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
74AHCT138
3 TO 8 LINE DECODER DEMULTIPLEXER
Description
The 74AHCT138 is an advanced high speed CMOS device that is
designed to be pin compatable with 74LS low power Schottky types.
The device accepts a three bit binary weighted address on input pins
A0, A1 and A2 and when enabled will produce one active low output
with the remaining seven being high.
There are two active LOW enable inputs E1 and E2, and one active
HIGH enable input E3. The disabled device state results in all outputs
being high. The enable state occurs with E1 and E2 asserted low and
E3 asserted high.
The multiple enable lines allow for the parallel expansion of decoders
to create 4-to-16 line versions with no additional parts and 5-to-32
versions with the addition of a single inverter.
Pin Assignments
Features
Supply Voltage Range from 4.5V to 5.5V
Sinks or Sources 8mA at VCC = 4.5V
CMOS Low Power Consumption
Schmitt Trigger Action at All Inputs
Inputs Accept up to 6.0V
ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115-A)
Exceeds 2000-V Human Body Model (A114-A)
Exceeds 1000-V Charged Device Model (C101C)
Latch-Up Exceeds 250mA per JESD 78, Class II
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Applications
Memory chip select decoding
Demultiplexing
Single line peripheral control
Allow simple serial bit streams from a microcontroller to control as
many peripheral lines as needed
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet
74AHCT138
Document number: DS35483 Rev. 2 - 2
1 of 9
www.diodes.com
June 2013
© Diodes Incorporated
1 page  
74AHCT138
Switching Characteristics
Symbol Parameter
Test Conditions
Propagation Delay Figure 2 CL =15pF
An to Yn
Figure 2 CL = 50pF
tPD
Propagation Delay Figure 2 CL = 15pF
E3 to Yn
Figure 2 CL = 50pF
Propagation Delay Figure 2 CL = 15pF
En to Yn
Figure 2 CL = 50pF
VCC
4.5V to 5.5V
4.5V to 5.5V
4.5V to 5.5V
4.5V to 5.5V
4.5V to 5.5V
4.5V to 5.5V
TA = +25°C
Min Typ Max
0.5 4.4 10.4
0.5 6.2 11.4
0.5 4.3 9.1
0.5 6.2 10.1
0.5 4.3 9.6
0.5 6.2 10.6
-40°C to +85°C
Min Max
1.0 12.0
1.0 13.0
1.0 10.5
1.0 11.5
1.0 11.0
1.0 12.0
-40°C to +125°C
Min Max
1.0 13.0
1.0 14.5
1.0 11.5
1.0 13.0
1.0 12.0
1.0 13.5
Unit
ns
ns
ns
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Test
Conditions
VCC = 5V
Typ
Cpd
Power dissipation
capacitance
f = 1 MHz all outputs switching-no load
23
Unit
pF
Parameter Measurement Information
VCC
4.5V to 5.5V
VI
3.0 V
Inputs
tr/tf
3ns
Input
1.5 V
VM
Output
VCC/2
CL
15pF, 50pF
Voltage Waveform
Pulse Duration
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74AHCT138
Document number: DS35483 Rev. 2 - 2
5 of 9
www.diodes.com
Voltage Waveform
Propagation Delay Times
Inverting and Non Inverting Outputs
June 2013
© Diodes Incorporated
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet 74AHCT138.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74AHCT132 | Quad 2-input NAND Schmitt trigger |  NXP Semiconductors |
| 74AHCT132D | Quad 2-input NAND Schmitt trigger | NXP Semiconductors |
| 74AHCT132PW | Quad 2-input NAND Schmitt trigger | NXP Semiconductors |
| 74AHCT132PWDH | Quad 2-input NAND Schmitt trigger | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |