DataSheetWiki


FLEX-14 fiches techniques PDF

HAMLIN - Sub-miniature normally open switch

Numéro de référence FLEX-14
Description Sub-miniature normally open switch
Fabricant HAMLIN 
Logo HAMLIN 





1 Page

No Preview Available !





FLEX-14 fiche technique
FLEX-14 Features and Benefits
Features
Sub-miniature normally open switch
with 14.00mm x 2.28mm (0.551” x
0.090”) glass envelope
Longer than standard, easily formed
leads
1010 Ohms insulation resistance
Capable of switching up to 200Vdc
Maximum contact rating 10 Watts
Available sensitivity range
10-30 AT
Benefits
Hermetically sealed switch contacts are
not effected by and have no effect on
their external environment
Low, stable contact resistance
Soft leads enable reliable hand forming
Zero operating power required for
contact closure
Fit and forget durability
Well suited to signal switching
www.hamlin.com
Applications
Reed relays
Security
Limit switching
Telecoms
Office equipment
Household appliances
DIMENSIONS (in) mm
(.872) REF.
22,15
CL OF OVERLAP
(.090) MAX.
2,28
(.0185) DIA. REF.
0,47
(.583) MIN.
14,80
(.551) MAX.
14,00
(1.744) NOM.
44,30
Switch Type
Contact Form
FLEX-14
A
ELECTRICAL RATINGS
Contact Rating (See note 1)
Voltage
Switching
Breakdown
Current
Switching
Carry
Resistance
Contact, Initial
Insulation
Capacitance
Contact
Temperature
Operating
Storage (5)
OPERATING CHARACTERISTICS
Operate Time (2)
Release Time (2)
Shock
11ms 12 sine wave
Vibration
50-2000 Hertz
Resonant Frequency
MAGNETIC CHARACTERISTICS
Pull-In Range (3)
Drop-out
Rating Sensitivity (4)
Test Coil
Watt - max.
Vdc - max.
Vdc - min.
A - max.
A - max.
- max.
- min.
pF - typ.
°C
°C
ms - max.
ms - max.
G - max.
G - max.
Hz - typ.
Ampere Turns
Ampere Turns- min
Ampere Turns
10
200
250
0.5
1.0
0.100
1010
0.2
-40 to +125
-65 to +125
0.55
0.20
100
30
5200
10-30
5
20
L4989
Notes
1) Contact rating-Product of the switching voltage and current should never exceed the wattage rating.
Contact Hamlin for additional load/life information.
2) Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
3) Pull in Range-Contact Hamlin for tolerances available within this range.
4) Rating Sensitivity-The value at which contact ratings and operating characteristics are determined. Derating
may be required below this value.
5) Storage Temperature-Long time exposure at elevated temperature may degrade solderability of the leads.
Hamlin USA Tel: +1 920 648 3000 Fax: +1 920 648 3001 Email: [email protected]
Hamlin UK
Tel: +44 (0)1379 649700 Fax: +44 (0)1379 649702 Email: [email protected]
Hamlin Germany Tel: +49(0) 6142 923920 Fax: +49(0) 6142 923921 Email: [email protected]
Hamectrol France Tel: +33 (0) 1 6047 3000 Fax: +33(0) 1 6015 9136 Email: [email protected]
Issue No: 1 Date: 01/03/07 DCR: B5013
DETAILS PROVIDED ON THIS DATA SHEET ARE PROVIDED FOR
INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED
UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE.
Product performance may be affected by the application to which the
product is applied. Upon request, HAMLIN will assist purchasers by
providing information specific to any particular application. HAMLIN
disclaims any and all liability whatsoever for any purchaser’s reliance
upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.

PagesPages 1
Télécharger [ FLEX-14 ]


Fiche technique recommandé

No Description détaillée Fabricant
FLEX-14 Sub-miniature normally open switch HAMLIN
HAMLIN
FLEX-14 14mm Reed Switch Littelfuse
Littelfuse

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche