DataSheetWiki


5KP160A fiches techniques PDF

Vishay - TRANSZORB Transient Voltage Suppressors

Numéro de référence 5KP160A
Description TRANSZORB Transient Voltage Suppressors
Fabricant Vishay 
Logo Vishay 





1 Page

No Preview Available !





5KP160A fiche technique
www.vishay.com
5KP8.5A thru 5KP188A
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
P600
FEATURES
• P600 glass passivated chip junction
• Available in uni-directional polarity only
• 5000 W peak pulse power capability with
a 10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VWM
VBR
8.5 V to 188 V
9.4 V to 231 V
PPPM
5000 W
PD 8.0 W
IFSM
500 A
TJ max.
175 °C
Polarity
Uni-directional
Package
P600
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
Peak pulse power dissipation with a 10/1000 μs waveform (1)
PPPM
5000
Peak pulse current with a 10/1000 μs waveform (1)
IPPM
See next table
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
PD 8.0
Peak forward surge current 8.3 ms single half sine-wave (fig. 5)
IFSM
600
Instantaneous forward voltage at 100 A (2)
VF 3.5
Operating junction and storage temperature range
TJ, TSTG
-55 to +175
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
(2) Measured 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
UNIT
W
A
W
A
V
°C
Revision: 24-Jun-14
1 Document Number: 88308
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PagesPages 5
Télécharger [ 5KP160A ]


Fiche technique recommandé

No Description détaillée Fabricant
5KP160 TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR Dc Components
Dc Components
5KP160 (5KP120 - 5KP200CA) 5000W TRANSIENT VOLTAGE SUPPRESSOR Won-Top Electronics
Won-Top Electronics
5KP160 Diode TVS Single Uni-Dir 160V 5KW 2-Pin Case P600 T/R New Jersey Semiconductor
New Jersey Semiconductor
5KP160A TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR Dc Components
Dc Components

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche