|
|
Número de pieza | KIA6282K | |
Descripción | 4.6W DUAL AUDIO POWER AMPLIFIER | |
Fabricantes | KEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de KIA6282K (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! SEMICONDUCTOR
TECHNICAL DATA
KIA6282K
BIPOLAR LINEAR INTEGRATED CIRCUIT
4.6W DUAL AUDIO POWER AMPLIFIER
KIA6282K is an audio power IC with built-in two channels
developed for portable radio cassette tape recorder with power
ON/OFF switch. Because of the parts reduction and SIP
(Single Inline Package), space merit is remarkable.
Thermal shut down protection circuit is built in.
A
F
S
Q
B
FEATURES
High Power.
POUT=2.5W/CH (Typ.)
: (VCC=9V, RL=4 , f=1kHz, THD=10%)
POUT=4.6W/CH
: (VCC=12V, RL=4 , f=1kHz, THD=10%)
Low popping noise at power ON.
Small Quiescent Current.
: ICCQ=19mA (Typ.) (VCC=9V, VIN=0)
Soft Clip.
Built-in thermal shut down protection circuit.
Best for supply voltage 9V, 12V.
Operation supply voltage range : VCC=6~15V.
DETAIL "A"
P
d
D1
d
D2
DETAIL "A"
T
DIM MILLIMETERS
A 29.7+_ 0.2
B 4.0 +_ 0.2
D1 0.6+_ 0.1
D2 0.7+_ 0.1
d 0.5+_ 0.1
F 28.0+_ 0.2
G 0.5+_ 0.2
H1 8.5+_ 0.3
H2 15.0+_ 0.3
L1 2.5+_ 0.2
L2 5.5+_ 0.2
P 2.54
Q R1.6
R 0.4
S 22.0+_ 0.2
T 0.4+0.1/-0.05
SSIP-12
MAXIMUM RATING (Ta=25 )
CHARACTERISTIC
SYMBOL
Supply Voltage
Output Current (Peak/CH)
Power Dissipation
Operating Temperature
Storage Temperature
VCC
IO(peak)
PD
Topr
Tstg
RATING
20
2.5
12.5
-20 75
-55 150
UNIT
V
A
W
1994. 10. 31
Revision No : 0
1/8
1 page KIA6282K
4. OSCILLATION PREVENTIVE MEASURES
For oscillation preventive capacitor C6 and C7 between the output terminal and GND, it is recommended to use Polyester
film capacitor having good characteristics for temperature and for high frequency. Since the characteristics of the capacitor is
liable to be influenced the temperature, use this capacitor after the temperature test to check the oscillation allowance.
In addition, as the position of the electrolytic capacitor has a remarkable influence on the oscillation, connect C10 to VCC at the
nearest possible position from power GND. At using this application with the voltage gain reduced, oscillation is liable to be produced.
Apply the capacitor after checking enough for its capacity, type and mounting position.
* As the oscillation allowance varies according to the printed pattern layout, the standard printed board of KEC is recommended
to be referred to for design it.
5. POWER ON/OFF SWITCH
There is power ON/OFF switch at pin. However, output power is changed by pin supply voltage when
in not same pin supply voltage, after referring to attached date, select pin supply voltage.
pin supply voltage
6. INPUT VOLTAGE
When the excessive signal is input, turning-up is produced in the clip waveform.
The turning-up point is VIN=300mVrms(Typ.) : VCC=9V, RL=4 , f=1kHz : Enough care must be taken for this phenomenon.
7. GND LINE
GND pin is not separated for Pre-GND and for Pw-GND. That is liable to cause distortion and cross talk worse.
Before use this IC, please check it.
1994. 10. 31
Revision No : 0
5/8
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet KIA6282K.PDF ] |
Número de pieza | Descripción | Fabricantes |
KIA6282 | 4.6W DUAL AUDIO POWER AMPLIFIER | SUM |
KIA6282K | 4.6W DUAL AUDIO POWER AMPLIFIER | KEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |