|
|
PDF JSW6-33DR Data sheet ( Hoja de datos )
| Número de pieza | JSW6-33DR | |
| Descripción | SP6T RF Switch | |
| Fabricantes | Mini-Circuits | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de JSW6-33DR (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
SP6T RF Switch
50Ω 10 to 2700 MHz High Power 3W
The Big Deal
• High Port count in super small size
• Single Positive Supply Voltage, 2.5 – 4.8V
• High Power P0.1dB, 3W typ.
• Low Insertion Loss, 0.6 dB at 1 GHz
JSW6-33DR+
CASE STYLE: MT1817
Product Overview
JSW6-33DR+ is a high power reflective SP6T RF switch, with reflective short on output ports in the off con-
dition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative
voltage generator. Its tiny 2x2mm, 14-lead case enables wideband performance in tight spaces and dense
PCB layouts.
Key Features
Feature
Wideband operation
10-2700 MHz
High IIP3:
55 dBm typ.
Low Loss, 0.6 dB at 1 GHz
High input power, 3W
Built in negative voltage generator
Advantages
Enables a single component to be used in a vast array of applications from VHF up to
2.7 GHz.
Results in little or negligible inter-modulation generation, meeting requirements for digital
communication signals.
Low loss and high power capability enable a single switch to be used for a variety of ap-
plications, saving inventory.
Operates with a single positive supply voltage; no need for DC blocking capacitors, un-
less external DC is present at the RF ports.
Built-in CMOS driver
Tiny MCLP package
2 x 2mm, 14-lead
No need for external driver, saving PCB space and cost.
Provides low inductance, repeatable transitions, and excellent thermal contact to PCB.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 1 of 7
1 page  
SP6T RF Switch
Absolute Maximum Ratings(5)
Parameter
Ratings
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to 150°C
VDD, Supply Voltage
Voltage Control
5.0V
-0.5V Min. 3.0 Max.
RF input power6
5 Watt
5. Operation of this device above any of these conditions may cause permanent damage.
6. Derate linearly to 2.5W at 85°C.
Truth Table(7) (State of control voltage selects the desired switch state)
State of Control Voltages
RF Common to
Control #1 Control #2 Control #3 RF1 RF2 RF3 RF4 RF5 RF6
L L L ON — — — — —
L L H — ON — — — —
L H L — — ON — — —
L H H — — — ON — —
H L L — — — — ON —
H L H — — — — — ON
HHH
Shutdown
7. Any control state not defined above, places the switch in an undefined state, but will not damage the switch.
JSW6-33DR+
Characterization Test Circuit
R1, R2, R3, R4=1KΩ
Figure 1: Block Diagram Of Test Circuit Used For Characterization.
(DUT soldered on Mini-Circuits’ TB-724+)
Test Equipment:
For Insertion loss, Isolation, Return loss:
Agilent’s N5230A Network Analyzer , E3631A power supply.
For Switching Time and Video Feed through
Agilent’s HP81110A pulse generator, 54833A Oscilloscope, E3631A power supply.
Agilent’s N9020A Spectrum Analyzer , E8257D Generator, E3631A power supply
For Compression:
R&S Network Analyzer ZVA24, E3631A power supply.
Conditions:
VFoDDr=In+s2e.5rt,io+3n.0loasnsd,
+4.8V, Control= 0 and 1.35V.
isolation and return loss: Pin=0
dBm
Notes
For Input IP3: Pin=+10dBm/tone at VDD=3V
A.
B.
PEleercfotrrimcaal nscpeecainficdaqtiuoanlsityFanaodtrtrpibSeuwrtfeoisrtmcaahnndicncegodnatditimatiocenos:nntRaoiFnt eefdxrpeinrqetsuhsieslynsscptayetc:eifDdicCiantitoahnitsd2so0pce0ucmmifiecVna,ttioaCrneodnboatcrsuoemldFeonrnteMaqriueneii-nCnteicrncydu:eit1’ds0taopKbpHeliczeaxbaclelnueddset0dabaalnisndhdedd+o t8neoVstt.fpoermrfoarmpaanrtceofctrhitiesrsiapaencdificmateioansudreomcuemnteinnts.tructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 5 of 7
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet JSW6-33DR.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| JSW6-33DR | SP6T RF Switch | Mini-Circuits |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |