|
|
PDF HCPL-J454 Data sheet ( Hoja de datos )
| Número de pieza | HCPL-J454 | |
| Descripción | High Speed Optocouplers | |
| Fabricantes | AVAGO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HCPL-J454 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
HCPL-4504/J454/0454, HCNW4504
High CMR, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-4504 and HCPL-0454 contain a GaAsP LED
while the HCPL-J454 and HCNW4504 contain an AlGaAs
LED. The LED is optically coupled to an integrated high
gain photo detector.
The HCPL-4504 series has short propagation delays and
high CTR. The HCPL-4504 series also has a guaranteed
propagation delay difference (tPLH-tPHL). These features
make the HCPL-4504 series an excellent solution to IPM
inverter dead time and other switching problems. The
CTR, propagation delay, and CMR are specified both for
TTL and IPM conditions which are provided for ease of
application. These single channel, diode-transistor opto-
couplers are available in 8-Pin DIP, SO-8, and Widebody
package configurations. An insulating layer between a
LED and an integrated photodetector provide electrical
insulation between input and output. Separate connec-
tions for the photodiode bias and output-transistor col-
lector increase the speed up to a hundred times that of
a conventional phototransistor coupler by reducing the
base collector capacitance.
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 NC
6 VO
5 GND
TRUTH TABLE
LED
ON
OFF
VO
LOW
HIGH
A 0.1 μF bypass capacitor between pins 5 and 8 is recommended.
Schematic
ICC 8
VCC
+
ANODE
2
VF
–
CATHODE
3
IF
SHIELD
IO 6
VO
5
GND
Features
• Short propagation delays for TTL and IPM applications
• 15 kV/μs minimum Common Mode Transient immu-
nity at VCM = 1500 V for TTL/load drive
• High CTR at TA = 25°C
>25% for HCPL-4504/0454
>23% for HCNW4504
>19% for HCPL-J454
• Electrical specifications for common IPM applications
• TTL compatible
• Open collector output
• Safety approval:
UL recognized
– 3750 V rms/1min. for HCPL-4504/0454/J454
– 5000 V rms/1min. for HCPL-4504 Option 020 and
HCNW4504
CSA approved
IEC/EN/DIN EN 60747-5-2 approved
– VIORM = 560 Vpeak for HCPL-0454 Option 060
– VIORM = 630 Vpeak for HCPL-4504 Option 060
– VIORM = 891 Vpeak for HCPL-J454
– VIORM = 1414 Vpeak for HCNW4504
Applications
• Inverter circuits and Intelligent Power Module (IPM)
interfacing: High Common Mode Transient immunity
(> 10 kV/μs for an IPM load/drive) and (tPLH - tPHL)
Specified (see Power Inverter Dead Time section)
• Line receivers: Short propagation delays and low in-
put-output capacitance
• High speed logic ground isolation: TTL/TTL, TTL/
CMOS, TTL/LSTTL
• Replaces pulse transformers: Save board space and
weight
• Analog signal ground isolation: Integrated photode-
tector provides improved linearity over phototransis-
tors
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
1 page  
HCPL-J454-400E/600E Widelead Gullwing Surface Mount Outline Drawing
LAND PATTERN RECOMMENDATION
9.80 ±0.25
0.386 ±0.010
1.016
0.040
TYPE NUMBER
DATE CODE
[1.19]
0.047
MAX.
A XXXX
YYWW RU
6.35 ±0.25
0.250 ±0.010
UL
RECOGNITION
[0.65] 0.025 MAX
3.56 ±0.13
0.140 ±0.005
1.27
0.050
12.9
0.508
[11.75 0.25]
0.460 0.010
7.62 ±0.51
0.300 ±0.020
2.0
0.08
[0.20] 0.008
[0.33] 0.013
[1.080] 0.320
0.043 0.013
2.54
0.100
BSC
DIMENSIONS IN [MILLIMETERS] INCHES
[0.152] 0.006
[0.406] 0.016
0.625 ±0.254
0.025 ±0.010
LEAD COPLANARITY
MAXIMUM: [0.102] 0.004
OPTION NUMBERS 400 AND 600 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20 mils) MAX.
30° NOM.
HCPL-0454 Outline Drawing (8-Pin Small Outline Package)
LAND PATTERN RECOMMENDATION
8
3.937 ± 0.127
(0.155 ± 0.005)
PIN ONE 1
0.406 ± 0.076
(0.016 ± 0.003)
765
XXX
YWW
234
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
1.270 BSC
(0.050)
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
* 5.080 ± 0.127
(0.200 ± 0.005)
7
45
X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0~7
0.228 ± 0.025
(0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
0.203 ± 0.102
(0.008 ± 0.004)
0.305 MIN.
(0.012)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
5
5 Page 
Electrical Specifications (DC)
Over recommended temperature (TA = 0°C to 70°C) unless otherwise specified. See note 12.
Parameter
Symbol Device
Min. Typ.* Max. Units Test Conditions
Fig. Note
Current
Transfer
Ratio
Current
Transfer
Ratio
Logic Low
Output
Voltage
Logic High
Output
Current
CTR HCPL-4504 25 32
HCPL-0454 21 34
60 %
TA = 25°C
VO = 0.4 V
VO = 0.5 V
IF = 16 mA, 1, 2, 5
VCC = 4.5 V 4
HCPL-J454 19 37
60
TA = 25°C
VO = 0.4 V
13 39
VO = 0.5 V
HCNW4504 23 29
60
TA = 25°C
VO = 0.4 V
19 31
63
VO = 0.5 V
CTR HCPL-4504 26 35
HCPL-0454 22 37
65 %
TA = 25°C
VO = 0.4 V
VO = 0.5 V
IF = 12 mA, 1, 2, 5
VCC = 4.5 V 4
HCPL-J454 21 43
65
TA = 25°C
VO = 0.4 V
16 45
VO = 0.5 V
HCNW4504 25 33
65
TA = 25°C
VO = 0.4 V
21 35
68
VO = 0.5 V
VOL HCPL-4504
HCPL-0454
0.2 0.4 V
0.5
TA = 25°C
IO = 4.0 mA
IO = 3.3 mA
IF = 16 mA,
VCC = 4.5 V
HCPL-J454
0.2 0.4
TA = 25°C
IO = 3.6 mA
0.5 IO = 3.0 mA
HCNW4504
0.2 0.4
TA = 25°C
IO = 3.6 mA
0.5 IO = 3.0 mA
IOH
0.003 0.5 μA
TA = 25°C
VO = VCC = 5.5 V IF = 0 mA
5
0.01 1
TA = 25°C
VO = VCC = 15 V
50
Logic Low
Supply
Current
ICCL HCPL-4504
HCPL-0454
HCNW4504
50 200 μA IF = 16 mA, VO = Open, VCC = 15 V
12
HCPL-J454
70
Logic High
ICCH
Supply Current
Input Forward VF
Voltage
HCPL-4504
HCPL-0454
0.02 1
μA
2
1.5 1.7 V
1.8
TA = 25°C
TA = 25°C
IF = 0 mA, VO = Open,
VCC = 15 V
IF = 16 mA
12
3
HCPL-J454
HCNW4504
1.45 1.59
1.35
1.85
1.95
TA = 25°C
IF = 16 mA
Input Reverse
Breakdown
Voltage
BVR
HCPL-4504
HCPL-0454
HCPL-J454
HCNW4504
5
3
V IR = 10 μA
IR = 100 μA
Temperature
Coefficient
of Forward
Voltage
Input
Capacitance
∆VF
∆TA
CIN
HCPL-4504
HCPL-0454
HCPL-J454
HCNW4504
HCPL-4504
HCPL-0454
HCPL-J454
HCNW4504
-1.6 mV/°C IF = 16 mA
-1.4
60 pF f = 1 MHz, VF = 0 V
70
*All typicals at TA = 25°C.
11
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet HCPL-J454.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HCPL-J454 | High CMR / High Speed Optocouplers |  Hewlett-Packard |
| HCPL-J454 | High Speed Optocouplers | AVAGO |
| HCPL-J456 | Intelligent Power Module and Gate Drive Interface Optocouplers |  Avago |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |