DataSheet.es    


PDF C4486 Data sheet ( Hoja de datos )

Número de pieza C4486
Descripción NPN Transistor - 2SC4486
Fabricantes Sanyo 
Logotipo Sanyo Logotipo



Hay una vista previa y un enlace de descarga de C4486 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! C4486 Hoja de datos, Descripción, Manual

Ordering number:EN3026
PNP/NPN Epitaxial Planar Silicon Transistors
2SA1706/2SC4486
High-Current Switching Applications
Applications
· Voltage regulators, relay drivers, lamp drivers.
Features
· Adoption of FBET, MBIT processes.
· Large current capacity and wide ASO.
· Fast switching speed.
Package Dimensions
unit:mm
2064
[2SA1706/2SC4486]
( ) : 2SA1706
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
ICBO
IEBO
hFE1
hFE2
fT
VCB=(–)50V, IE=0
VEB=(–)4V, IC=0
VCE=(–)2V, IC=(–)100mA
VCE=(–)2V, IC=(–)1.5A
VCE=(–)10V, IC=(–)50mA
* : The 2SA1706/2SC4486 are classified by 100mA hFE as follows :
100 R 200 140 S 280 200 T 400
E : Emitter
C : Collector
B : Base
SANYO : NMP
Ratings
(–)60
(–)50
(–)6
(–)2
(–)4
1
150
–55 to +150
Unit
V
V
V
A
A
W
˚C
˚C
Ratings
min typ
100*
40
150
max
(–)100
(–)100
400*
Unit
nA
nA
MHz
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
83098HA (KT)/5249MO, TS No.3026-1/5

1 page




C4486 pdf
2SA1706/2SC4486
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of August, 1998. Specifications and information herein are subject to
change without notice.
PS No.3026-5/5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet C4486.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
C4480NPN Transistor - 2SC4480Sanyo Semicon Device
Sanyo Semicon Device
C4481NPN Transistor - 2SC4481Sanyo
Sanyo
C4482NPN Transistor - 2SC4482Sanyo
Sanyo
C4483NPN Transistor - 2SC4483Sanyo
Sanyo

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar