DataSheetWiki


A4054A fiches techniques PDF

AiT Semiconductor - 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER

Numéro de référence A4054A
Description 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER
Fabricant AiT Semiconductor 
Logo AiT Semiconductor 





1 Page

No Preview Available !





A4054A fiche technique
AiT Semiconductor Inc.
www.ait-ic.com
A4054A
800mA STANDALONE LINEAR Li-ion BATTERY CHARGER
THERMAL REGULATION
DESCRIPTION
The A4054A is a complete constant current / constant
voltage linear charger for single cell Lithium-Ion
batteries. No external sense resistor is needed, and
no blocking diode is required due to the internal
MOSFET architecture. Thermal feedback regulates
the charge current to limit the die temperature during
high power operation or high ambient temperature.
The charge voltage is fixed at 4.2V, and the charge
current can be programmed externally with a single
resistor. The A4054A automatically terminates the
charge cycle when the charge current drops to 1/10
the programmed value after the final float voltage is
reached.
When the input supply (wall adapter or USB supply) is
removed, the A4054A automatically enters a low
current state, dropping the battery drain current to
less than 2μA. The A4054A can be put into shutdown
mode, reducing the supply current to 25μA. Other
features include charge current monitor, under-voltage
lockout, automatic recharge and a status pin to
indicate charge termination and the presence of an
input voltage. A4054A will check the battery voltage
first, it will not start charging unless the battery
voltage is below the auto-rechrage threshold.
The A4054A is available in SOT-25 packages.
FEATURES
Programmable Charge Current Up to 800mA
No MOSFET, Sense Resistor or Blocking
Diode Required
Preset 4.2V Charge Voltage with ±1%
Accuracy
Charge Current Monitor Output for Gas
Gauging
Thermal Regulation Maximizes Charge Rate
Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly
from USB Port
Over-Voltage Protect
Automatic Recharge
Charge Status Output Pin
C/10 Charge Termination
25μA Supply Current in Shutdown
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Available in SOT-25 Packages
APPLICATION
Cellular and Smart Phones
Charging Docks and Cradles
Blue Tooth Applications
PDAs
MP3/MP4/MP5 Players
ORDERING INFORMATION
TYPICAL APPLICATION
Package Type
Part Number
SOT-25
A4054AE5R
E5
A4054AE5VR
Note
R: Tape & Reel
V: Halogen free Package
AiT provides all RoHS products
Suffix “V” means Halogen free Package
REV1.1
- DEC 2008 RELEASE, JUN 2012 UPDATED -
-1-

PagesPages 20
Télécharger [ A4054A ]


Fiche technique recommandé

No Description détaillée Fabricant
A4054A 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER AiT Semiconductor
AiT Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche