|
|
Numéro de référence | BGU7033 | ||
Description | 1 GHz wideband low-noise amplifier | ||
Fabricant | NXP Semiconductors | ||
Logo | |||
1 Page
BGU7033
1 GHz wideband low-noise amplifier with bypass
Rev. 2 — 13 September 2010
Product data sheet
1. Product profile
CAUTION
1.1 General description
The BGU7033 MMIC is a wideband amplifier with selectable gain and bypass mode. It is
designed specifically for high linearity, low noise applications over a frequency range of
40 MHz to 1 GHz. It is especially suited to Set-Top Box applications.
The LNA is housed in a 6-pin SOT363 plastic SMD package.
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features and benefits
Internally biased
Programmable gain and bypass modes: Gp = 10 dB, Gp = 5 dB and bypass
Flat gain between 40 MHz and 1 GHz
Noise figure of 4.5 dB
High linearity with an IP3O of 29 dBm
75 Ω input and output impedance
Power-down during bypass mode
Bypass mode current consumption < 5 mA
ESD protection > 2 kV Human Body Model (HBM) on all pins
1.3 Applications
Terrestrial and cable Set-Top Boxes (STB)
Silicon and “Can” tuners
Personal and Digital Video Recorders (PVR and DVR)
Home networking and in-house signal distribution
|
|||
Pages | Pages 11 | ||
Télécharger | [ BGU7033 ] |
No | Description détaillée | Fabricant |
BGU7031 | 1 GHz wideband low-noise amplifier | NXP Semiconductors |
BGU7032 | 1 GHz wideband low-noise amplifier | NXP Semiconductors |
BGU7033 | 1 GHz wideband low-noise amplifier | NXP Semiconductors |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |