DataSheetWiki


A1244 fiches techniques PDF

Allegro MicroSystems - Two Wire Hall-Effect Latch

Numéro de référence A1244
Description Two Wire Hall-Effect Latch
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





A1244 fiche technique
A1244
Chopper-Stabilized, Two-Wire Hall-Effect Latch
Features and Benefits
▪ AEC-Q100 automotive qualified
▪ High-speed, 4-phase chopper stabilization
▫ Low switchpoint drift throughout temperature range
▫ Low sensitivity to thermal and mechanical stresses
▪ On-chip protection
▫ Supply transient protection
▫ Reverse-battery protection
▪ On-board voltage regulator
▫ 3 to 24 V operation
▪ Solid-state reliability
▪ Robust EMC and ESD performance
▪ Industry-leading ISO 7637-2 performance through use of
proprietary, 40 V clamping structures
Packages:
3-pin ultra-mini SIP
1.5 mm × 4 mm × 3 mm
(suffix UA)
3-pin SOT23-W
2 mm × 3 mm × 1 mm
(suffix LH)
Description
The A1244 is a two-wire Hall-effect latch. The devices are
produced on theAllegroadvanced BiCMOS wafer fabrication
process, which implements a patented high-frequency, 4-phase,
chopper stabilization technique. This technique achieves
magnetic stability over the full operating temperature range,
and eliminates offsets inherent in devices with a single Hall
element that are exposed to harsh application environments.
Two-wire latches are particularly advantageous in cost-sensitive
applications because they require one less wire for operation
versus the more traditional open-collector output switches.
Additionally, the system designer inherently gains diagnostics
because there is always output current flowing, which should
be in either of two narrow ranges. Any current level not within
these ranges indicates a fault condition.
The Hall-effect latch will be in the high output current state
in the presence of a magnetic south polarity field of sufficient
magnitude and will remain in this state until a sufficient north
polarity field is present.
The device is offered in two package styles. The LH is a
SOT-23W style, miniature low-profile package for surface-
mount applications. The UA is a 3-pin ultra-mini single inline
package (SIP) for through-hole mounting. Both packages are
lead (Pb) free, with 100% matte-tin leadframe plating.
Not to scale
Approximate footprint
V+ VCC
Functional Block Diagram
0.01 µF
Regulator
To all subcircuits
Clock/Logic
Amp
Low-Pass
Filter
Schmitt
Trigger
Polarity
A1244-DS, Rev. 2
GND
UA package only
GND

PagesPages 12
Télécharger [ A1244 ]


Fiche technique recommandé

No Description détaillée Fabricant
A1240A (A1225A - A1280A) FPGAs Actel
Actel
A1240A-xxxx (A1225A - A1280A) FPGAs Actel
Actel
A1240XL Integrator Series FPGAs Actel
Actel
A1240XL-xxxx FPGAs Actel
Actel

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche