IN4000 Datasheet PDF - SICK
| Part Number | IN4000 | |
| Description | Safety Sensor | |
| Manufacturers | SICK | |
| Logo |  |
|
|
There is a preview and IN4000 download ( pdf file ) link at the bottom of this page. Total 4 Pages | ||
Preview 1 page No Preview Available !
IN 4000
Safety Sensor
The safety sensor IN 4000 is an in-
ductive safety sensor that is activated
by metal (e.g. steel ST37). It does not,
therefore, require a separate coded
actuator.
Due to the non-contact form of opera-
tion, this sensor has advantages in
that it is straightforward to adjust and
install. It also has increased resist-
ance to shock and vibration.
The sensor is BIA-approved and is
certified for cat. 4 in accordance with
EN 954-1.
The sensor can be connected directly
to a safe PLC or to the IN 4000 relay
evaluation unit.
Due to the detection of short circuits
and crossed circuits, several sensors
can be connected in series.
The response range of the sensor is
monitored spatially and over time. In
this way increased protection against
tampering is provided.
The input and output signals on the
sensor correspond to EN 61131-2
and are thus compatible with the
I/O signals on the safe PLC.
Using LEDs the status indication can
be read directly on the sensor or the
protective device.
Failures, for example a coil break,
short circuit or cable break are detect-
ed by the sensor's self-monitoring.
Up to 10 sensors can be connected
to the IN 4000 relay evaluation unit.
External device monitoring, 3 safety-
relevant normally open contacts and
2 normally closed diagnostic contacts
provide a high degree of flexibility for
the integration in the controller.
Features
■ Control category 4 according
to EN 954-1
■ No actuator necessary
■ Sensor with LED status display
■ Safe cascading of the sensors
possible
■ Direct connection of the
sensors to safe PLC
■ Connection of up to 10 sensors
to one evaluation unit
Preliminary data sheet
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for IN4000 electronic component. |
| Information | Total 4 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ IN4000.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| IN400 | The function is TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER. Dc Components |  |
| IN4000 | The function is Safety Sensor. SICK | |
| IN4000 | The function is Safety Sensor Operating Instructions. SICK | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
IN40
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||