|
|
Número de pieza | VC0702 | |
Descripción | TV Camera Processor | |
Fabricantes | VIMICRO | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de VC0702 (archivo pdf) en la parte inferior de esta página. Total 21 Páginas | ||
No Preview Available ! VC0702_100-0.99_En
VC0702
TV Camera Processors
Datasheet
Preliminary
Version 0.99
April 20, 2006
Notes1: The information is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Notes2: Not all products and/or types are available in every country. Please check with a Vimicro
sales representative availability and additional information.
Vimicro Copyright© 1999-2006
www.vimicro.com
Page 1 of 21
1 page VC0702_100-0.99_En
3. GENERAL FEATURE
9 Support CIF/VGA sensors
9 Support Color or BW CMOS and CCD sensors
9 Build-in 8-bit MCU
9 Video Out
Composite video: NTSC or PAL
Component Video: RGB or YCbCr (VC0702PLSB only)
S-Video (VC0702PLSB only)
Scan mode: interlaced and progressive
External field sync.
9 GPIO support typical control function
Motion detection alarm output
Color/BW manual conversion switch control
Infrared LED control output
9 Image Pipeline
10-bit width accuracy in color processing
On-chip color bar generator for testing
Auto Exposure (AE)
Auto White Balance (AWB)
Auto Gain Control (AGC)
Auto bad pixel detection and cancellation
Auto flicker detection and cancellation
Auto lens shading compensation
Configurable image noise reduction
Configurable image sharpness enhancement
Configurable gamma and color correction
Configurable brightness, color saturation, and hue
Edge-adaptive CFA interpolation
Up to 16 windows for statistical collection, exposure
Color/BW video image auto/manual conversion
Up to 16-window auto motion detection supply
Auto frame rate conversion
Build-in IPP for image size conversion
Built-in 3-ch 10-bit generic video DACs
9 One input clock: 6MHz crystal
9 Others:
EEPROM configurable
UART controllable
9 Power management
Normal mode
Low power mode
Vimicro Copyright© 1999-2006
www.vimicro.com
Page 5 of 21
5 Page SIGNAL NAME
EERPM_BUS
OROM_MOD
SIF_EDGE
ESYNC_MOD
UM_MODE
VC0702_100-0.99_En
DESCRIPTION
Used for the selection of EEPROM I2C bus used pin
0 (default): share Sensor I2C bus
1: occupy Sensor data in [1:0]
Used for the selection of system will boot from internal ROM or External ROM
0(default): boot from internal ROM
1: boot from external ROM
Used for the selection of sensor-interface sample sensor’s input clock edge
0(default): use default setting for sampling
1: use reverse edge for sampling
Used for the selection of external sync signal or not
0(default): disable external sync signal
1: enable external sync. Signal
Reserved.
Vimicro Copyright© 1999-2006
www.vimicro.com
Page 11 of 21
11 Page |
Páginas | Total 21 Páginas | |
PDF Descargar | [ Datasheet VC0702.PDF ] |
Número de pieza | Descripción | Fabricantes |
VC0702 | TV Camera Processor | VIMICRO |
VC0706 | Digital Video Processor | VIMICRO |
VC0706 | Serial Port Debug User Manual | VIMICRO |
VC0706PREA | Digital Video Processor | VIMICRO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |