DataSheet.es    


PDF NTCAIMME3C90373 Data sheet ( Hoja de datos )

Número de pieza NTCAIMME3C90373
Descripción Miniature Immersion Sensor
Fabricantes Vishay 
Logotipo Vishay Logotipo



Hay una vista previa y un enlace de descarga de NTCAIMME3C90373 (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! NTCAIMME3C90373 Hoja de datos, Descripción, Manual

www.vishay.com
NTCAIMME3C90373
Vishay BCcomponents
NTC Thermistors, Miniature Immersion Sensor
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
10K
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Operating temperature range:
At zero dissipation
±3
3984
± 0.5
- 25 to + 105
%
K
%
°C
Response time t 63.2 %
(25 °C to water 85 °C)
1.5 s
Dissipation factor
Mounted in still air
2.8 mW/K
In still water
5.6
Maximum power dissipation at 55 °C
100
mW
Min. dielectric withstanding voltage
between terminals and capsule (10 s)
500
VAC
Insulation resistance at 500 VDC
Thermal gradient
> 100M
< 0.02
K/K
Climatic category (LCT/UCT/days)
25/105/56
-
Weight
2.1 g
Note
• Other R25 values and tolerances available upon request
FEATURES
• Fast time response for fluid immersion
applications
• Reduced thermal gradient, due to the use of
small tip dimensions and thin isulated wire
• Sensor for permanent contact with water or
other liquids
• Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
Immersion sensor used for temperature measurement,
sensing and control in:
• Water boilers
• Heating systems
• Chiller systems
• Water and used water systems
• Water and oil tanks
• Consumer appliances, Coffee machines
• Industrial appliances
• Solar heating systems
DESCRIPTION
Miniature insulated chip NTC thermistor mounted in a
stainless steel housing with brass collar for sealed mounting
and twin PVC isulated AWG#30 lead wire connection.
MOUNTING
• The sensor can be mounted by means of a sealing O-ring
and screw
• The end wire can be soldered, or crimped to a connector
• Optional connector for Wire-to-Wire or Wire-to-Board
connections
• The contact with liquid should stay below the brass collar
(see Fig. 1 for mounting example)
• Not intended for corrosive or high acidic liquids
ELECTRICAL DATA AND ORDERING INFORMATION
R25-VALUE R25-TOL. B25/85-VALUE B25/85-TOL.
(k) (%) (K) (± %)
SAP MATERIAL
NUMBER
10 ± 3 3984
0.5 NTCAIMME3C90373
Note
• Ordering information can be found on:
www.vishay.com/doc?33036
PACKAGING
Available in plastic bags of 250 pieces.
DESCRIPTION
NTC Immersion 10K 3 % 3984K 0.5 %
R/T
TABLE
Table 1
DESIGN-IN SUPPORT
• Other resistance curves and tolerances are available on
request
• Consult Vishay for other lead length
• 3D solid models: www.vishay.com/doc?29106
• NTC curve computation:
www.vishay.com/resistors-non-linear/ntc-curve-list/
Fig. 1 - Mounting example with sealing ring and screw.
Revision: 08-Feb-12
1 Document Number: 29131
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet NTCAIMME3C90373.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
NTCAIMME3C90373Miniature Immersion SensorVishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar