DataSheet.es    


PDF S43SD-YD01 Data sheet ( Hoja de datos )

Número de pieza S43SD-YD01
Descripción Wide Plasma Display Module
Fabricantes Samsung 
Logotipo Samsung Logotipo



Hay una vista previa y un enlace de descarga de S43SD-YD01 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! S43SD-YD01 Hoja de datos, Descripción, Manual

FOR MESSRS:
DATE: 03, 03, 2012
China STD
CUSTOMER’S SPECIFICATIONS
(Approval Edition)
108.89cm (43 Inch) Wide Plasma Display Module
MODEL : S43SD-YD01
(NTSC/PAL)
* This specification will be approved by both China STD and Samsung SDI Co.,Ltd.
* Please return one of this specification with your signature for approval.
Proposed by:
Approved by:
Signature
Genral Manager. Changsub, Son
PDP Development Team,
PDP Business Division,
Samsung SDI Co., Ltd
Signature
.
SAMSUNG SDI CO.,LTD.

1 page




S43SD-YD01 pdf
SAMSUNG SDI Corporation
1. DESCRIPTION
Plasma Display Panel
The S43SD-YD01 is a 43-inch wide full color plasma display Module with a resolution of
852(H) × 480(V) pixels. The display module includes the Plasma Display Panel,
the Panel Driving Electronics, the Logic Control Board.
2. FEATURES
Wide aspect ratio(16:9) 43 inch diagonal display screen. The display area is 945.94mm
wide and 539.59mm high.
Slim and light weight. The display Module is 49mm in depth and weight only
approx. 10.0kg.
1073.7 million colors(10Bit), or 16.77 million colors(8Bit) combination of R,G and B
digital data.(According to LVDS input selection)
High Luminance, High contrast, Wide viewing angle. The screen has in Film
transmissivity 47.0%, NTSC/PAL), contrast of typical 1000,000:1 (NTSC,PAL)
And a viewing angle of greater than 160° comparable to that achieved
3. PRODUCT NAME AND MODEL NUMBER
Product name : 43 inch Full Color Plasma Display Module
(abbreviation : PDP Module)
Model number : S43SD-YD01 (Project name : EV)
Product Code : PP43SF003A
4. FUNCTION OUTLINE
The plasma display module has an APC(Automatic Power Control) function which
restricts power consumption within the certain value with regard to each display load
ratio.
The plasma display module is operated by following digital video signals; Vertical
synchronous signal, Horizontal synchronous signal, Enable signal and 8~10bit data
signals of each R, G and B color. All signals are based on LVDS level.
The plasma display module is operated at 50Hz60Hz/100Hz frame rate. An external frame
rate conversion is required in order to display the other formats.
The plasma display module requires several types of input power voltages ; voltage for
logic IC, voltage for Gate Driver, voltage for Sustain and voltage for Address.
The plasma display module is operated at progressive signal only.
An external progressive scan conversion is required in order to display the other formats.
SAMSUNG SDI
- 5/63 -
Rev.1.0 03/03/12

5 Page





S43SD-YD01 arduino
SAMSUNG SDI Corporation
6.5 Display Cell Defect Specification
Plasma Display Panel
In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into three types;
(1) Non-lighting cell defect : defect in which the cell is always off
(2) Non-extinguishing cell defect : defect in which the cell is always on.
(3) Flickering cell defect : defect in which the cell is flickering.
(4) High intensity cell defect : defect in which the cell is brighter than other cells
(5) Test Pattern : Full White, Full Red, Full Green and Full Blue with 1024 gray level.
The display cell defect specifications define the allowed limits for display cell defects
and
are used as the criteria in determining whether a panel should be shipped.
W
Zone B
H/4
H Zone A H/2
W/4
W/2 W/4
Figure-5. Measurement Area
H/4
Item
Non-lighting cell
Non-extinguishing cell
Flickering cell
(the W/R/G/B screen)
Flickering cell
(the other pattern)
High Intensity Cell
Continuous Cell
Total defect
SAMSUNG SDI
Number of cell defects
A Zone
B Zone
3 and less
10 and less
1 and less
2 and less
2 and less
3 and less
1 and less
2 and less
1 and less
2 and less
Remark
Regardless of A and B Zone,
Maximum 1 Cell Defect
in an area of 50*50mm
is allowed.
1 and less
1 and less
- 11/63 -
14 and less
Rev.1.0 03/03/12

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet S43SD-YD01.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
S43SD-YD01Wide Plasma Display ModuleSamsung
Samsung

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar