DataSheetWiki


FT903 fiches techniques PDF

FTDI - Embedded Microcontroller

Numéro de référence FT903
Description Embedded Microcontroller
Fabricant FTDI 
Logo FTDI 





1 Page

No Preview Available !





FT903 fiche technique
FT900/1/2/3 Embedded Microcontroller Datasheet
Version 1.0
Document No.: FT_000965 Clearance No.: FTDI#421
Future Technology Devices
International Ltd.
FT900/1/2/3
(Embedded Microcontroller)
The FT900 series includes the FT900,
FT901, FT902 and FT903 which are
complete System-On-Chip 32-bit RISC
microcontrollers for embedded
applications featuring a high level of
integration and low power
consumption. It has the following
features:
High performance, low power 32-bit FT32 core
processor, running at a frequency of 100MHz.
256kB on-chip Flash memory.
256kB on-chip shadow program memory.
True Zero Wait States (0WS) up to 3.1 DMIPS
per MHz performance
64kB on-chip data memory.
EFUSE for security configuration.
Integrated Phase-Locked Loop (PLL) supports
external 12MHz crystal and direct external clock
source input.
32.768 kHz real time clock support.
One USB2.0 EHCI compatible host controller
supports high-speed (480 Mbit/s), full-speed
(12 Mbit/s), and low-speed (1.5 Mbit/s).
One USB2.0 peripheral controller supports high-
speed (480 Mbit/s) and full-speed (12 Mbit/s).
USB2.0 host and peripheral controllers support
the Isochronous, Interrupt, Control, and Bulk
transfers.
10/100 Mbps Ethernet that is compliant with the
IEEE 802.3/802.3u standards. (FT900 and
FT901 only)
Support One-Wire debugger download firmware
to Flash memory or shadow program memory,
and support software debugger.
Two CAN controllers support CAN protocol 2.0
parts A & B, data rate is up to 1 Mbit/s. (FT900
and FT902 only)
One SPI master supports single / dual / quad
modes of data transfer. Clock rate is up to 25
MHz
Two SPI slaves support single data transfer
with 25MHz clock.
Two I2C bus interfaces can be configured as
master or slave, which support standard / fast
/ fast plus / high speed mode data transfers.
Max data transfer rate up to 3.4 Mbit/s. Clock
stretching is supported.
I2S bus interface can be configured as master
or slave. Two clock input options (24.576 MHz
and 22.5792 MHz) to support I2S master mode
for different audio sample rates.
UART interface can be configured as one full
programmable UART0 or two simple UART0 and
UART1 with CTS / RTS control function.
Four user timers with pre-scaling and a
watchdog function.
8-bit parallel data interface supports camera
data capturing.
Support 7 independent PWM channels. Channel
0 and 1 can be configured as PCM 8-bit/16-bit
stereo audio output.
SD host controller is compatible to standard
specification V3.0, it supports up to 25 MHz SD
clock speed and software supports SD card
format in SD/SDHC/SDXC.
Support two 10-bit DAC 0/1 channels output,
sample rate at ~1 MS/s.
Support seven 10-bit ADC 1/7 channels input,
sample rate is up to ~960 kS/s.
Single 3.3 volt power supply, built-in 1.2 V
regulators.
3.3 volt I/O power supply.
Support USB Battery Charging Specification
Rev 1.2. Downstream port can be configured as
SDP, CDP or DCP. Upstream port can perform
BCD mode detection.
Support VBUS power switching and over
current control.
Power-On Reset (POR).
-40°C to 85°C extended operating temperature
range.
Available in compact Pb-free 100-Pin packages
(all RoHS compliant).
Copyright © 2014 Future Technology Devices International Limited
1

PagesPages 30
Télécharger [ FT903 ]


Fiche technique recommandé

No Description détaillée Fabricant
FT900 Embedded Microcontroller FTDI
FTDI
FT901 Embedded Microcontroller FTDI
FTDI
FT902 Embedded Microcontroller FTDI
FTDI
FT903 Embedded Microcontroller FTDI
FTDI

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche