DataSheetWiki


FMCE-0328 fiches techniques PDF

Crane - EMI Input Filter

Numéro de référence FMCE-0328
Description EMI Input Filter
Fabricant Crane 
Logo Crane 





1 Page

No Preview Available !





FMCE-0328 fiche technique
Crane Aerospace & Electronics Power Solutions
FMCE-0328 EMI Input Filter
28 VOLT InPuT – 3 AMP
FEATuRES
Attenuation to 60 db at 500 kHz, typical
Operating temperature -55° to +125°C
Nominal 28 V input, -0.5 to 50 V operation
Transient rating -0.5 to 80 V for 1 second
Up to 3 A throughput current over the
full input voltage range of -0.5 to 50 V
Compliant to
- MIL-STD-461C CE03
- MIL-STD-461D, E and F CE102
- MIL-STD-461C CS01
- MIL-STD-461D, E and F CS101
Compatible with MIL-STD-704 A-E 28 VDC power bus
inPut VOLtAge
AnD Current
Input (V)
28
Current (A)
3
DESCRIPTIOn
Interpoint specifically designed the FMCE-0328™ EMI filter to
reduce the input line reflected ripple current of the following high
frequency DC/DC converters: MTR, MHF+ and MHV Series
converters. These filters are intended for use in 28 volt applica-
tions which must meet MIL-STD-461C CE03 and CS01 and/or
MIL-STD-461D, E and F CE102 and CS101 levels of conducted
emissions. At 50 VDC input (high line), the filter provides 150
watts of throughput power.
The FMCE-0328 filters are built using thick-film hybrid tech-
nology and are hermetically sealed in metal packages for military,
aerospace, and other high-reliability applications. Only ceramic
capacitors are used in the filters to ensure reliable high tempera-
ture operation.
MiL-StD nOiSe MAnAgeMent
When used in conjunction with Interpoint converters, the FMCE-
0328 filters reduce input ripple current within the frequency band
of 100 kHz to 50 MHz. When used with an Interpoint converter,
performance exceeds the CEO3 test of MIL-STD-461C and
meets the requirements of CS01 of MIL-STD-461C. These filters
also meet CE102 and CS101 of MIL-STD-461D, E and F.
OPerAting teMPerAture
The filters are rated to operate, with no degradation of perfor-
mance, over the temperature range of -55°C to +125°C (as
measured at the baseplate). Above +125°C, current must be
derated as specified on the following page.
The filters are offered with standard screening, “ES” screening,
or fully compliant to “883” MIL-PRF-38534 Class H screening.
Standard microcircuit drawings (SMD) are available.
inSertiOn LOSS
Low DC resistance design results in a maximum power loss of
less than 2% with typical input voltage.
Crane Aerospace & Electronics
Electronics Group (Interpoint Brand)
PO Box 97005 • Redmond WA 98073-9705
425.882.3100 • [email protected]
www.interpoint.com
Page 1 of 10
FMCE-0328 Rev D - 20100413

PagesPages 10
Télécharger [ FMCE-0328 ]


Fiche technique recommandé

No Description détaillée Fabricant
FMCE-0328 EMI Input Filter Crane
Crane

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche