DataSheetWiki


FX6-60S-0.8SV fiches techniques PDF

Hirose Electric - 0.8mm Pitch Stacking Height 5 to 9mm Connector

Numéro de référence FX6-60S-0.8SV
Description 0.8mm Pitch Stacking Height 5 to 9mm Connector
Fabricant Hirose Electric 
Logo Hirose Electric 





1 Page

No Preview Available !





FX6-60S-0.8SV fiche technique
0.8mm Pitch Stacking Height 5 to 9mm Connector
FX6 Series
Stacking Height: 5 to 9mm
5~9mm
Mounting area 50% OFF, compared with the half pitch connector
Half pitch connector
(FX2 series)
FX6 series
(If compared with 60 contacts)
sFeatures
1. Stacking Height 5 to 9mm
4. Automatic Mounting
The board to board stacking height can be set at every
The standard packaging specification specifies the stick
millimeter between 5 and 9mm.
package, considering the automatic mount, while the emboss
package can also correspond to the connector with less than
2. Effective Contact Length 1.7mm
80 contacts. (However, the product is limited to 80 contacts.)
Despite the low profile type connector, the connector has the
1.7mm long effective contact length and provides a margin 5. SMT Coplanarity
sufficient to contact.
The lead coplanarity on the SMT soldered area is maintained
3. Mating Guide
with the high accuracy of less than 0.1mm.
The self-alignment for mating action exhibits a high guide
level at ± 1mm, and makes the mating process easier by
providing the guide rib.
sApplications
Note PC, business equipments such as handy terminals, and other equipment which require miniaturization or light-weight.
sProduct Specifications
Rating
Current rating 0.5A
Operating Temperature Range -55ç to +85ç Note 1. Storage Temperature Range -10ç to +60ç Note 2.
Voltage rating 100V AC Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Item Specification
Condition
1. Insulation Resistance 100M ohms min
250V DC
2. Withstanding voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance 40m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 50m ohms max.
Insulation resistance: 100m ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 50m ohms max:
Insulation resistance: 100m ohms min.
(-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes 15 to 35ç: 2 to 3minutes)5 cycles
7. Durability (Mating/un-mating) Contact resistance: 50m ohms max.
100 cycles
8. Resistance to Soldering No deformation of components affecting performance. Reflow: At the recommended temperature profile
heat Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
A213

PagesPages 13
Télécharger [ FX6-60S-0.8SV ]


Fiche technique recommandé

No Description détaillée Fabricant
FX6-60S-0.8SV 0.8mm Pitch Stacking Height 5 to 9mm Connector Hirose Electric
Hirose Electric

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche