SE110-00 Datasheet PDF - Faraday
| Part Number | SE110-00 | |
| Description | SET-TOP VIDEO POST FILTER | |
| Manufacturers | Faraday | |
| Logo |  |
|
|
There is a preview and SE110-00 download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
SE110-00
SET-TOP VIDEO POST FILTER
The SE110-00 is a surface mountable active hybrid module designed to interface Philips SAA7185 series
digital video encoders to 75Ω composite (CMPS), Luma (Y) and Chroma (C) outputs. Use of high
performance operational amplifiers ensures minimal differential phase/gain errors and the ability to drive ±
2.5V into 75Ω loads.
Other features
! Drives two composite outputs and one Y/C output
! accurate factory set gain of 0 dB (6 dB optional - order SE110-60)
! 75Ω output termination resistors provided
! sinx/x correction for 27 MHz sampling
! high input impedance - makes interfacing easy
! DC coupling eliminates tilt problems associated with AC coupling
! DC offset of encoder output (due to single rail operation) is corrected to bring blanking level near zero
! 24-pin j-lead surface mount package
FILTER SPECIFICATION FOR EACH CHANNEL
End of Passband
6.0 MHz
Passband shape
sinx/x
Sampling frequency
Amplitude ripple1
27 MHz
± 0.5 dB to 6.0 MHz,
Gain
0 dB ± 0.2 dB
Group Delay ripple
< 10 ns
Start of stopband
21 MHz
Stopband rejection wrt 100 kHz
> 40 dB (with sinx/x)
Input impedance
100 kΩ typical
Output impedance
75Ω
Supply voltage
± 5V
Supply current
25 mA per rail (typical)
Package
1 measured against sinx/x predistortion curve
DR00144A
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA087.DOC
Page 1 of 2
Jun-99(A)
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SE110-00 electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ SE110-00.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| SE110-00 | The function is SET-TOP VIDEO POST FILTER. Faraday | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
SE11
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||