DataSheetWiki


FX4A2-52S-1.27SV fiches techniques PDF

Hirose Electric - Stacking Height 5 to 11mm Half Pitch Connector

Numéro de référence FX4A2-52S-1.27SV
Description Stacking Height 5 to 11mm Half Pitch Connector
Fabricant Hirose Electric 
Logo Hirose Electric 





1 Page

No Preview Available !





FX4A2-52S-1.27SV fiche technique
Stacking Height 5 to 11mm Half Pitch Connector
FX4 Series
Stacking Height Flexible
5 to 11mm
DIP type
6 to 11mm
SMT type
The mounting area 70% reduced, compared with
conventional product (FX2 series)
FX2 series
FX4 series
(Compared with 60 contacts)
sFeatures
The FX4 series is a miniature board to board connectors, where the stacking height can be set at the 1mm interval.
According to the mounting method, you can select the product from the through hole type and SMT type.
qThrough hole Type
1. Small and Light
The mounting space and weight is reduced about 30%,
compared to the conventional product (HRS FX2 series),
respectively, and the mounting area about 70% reduced,
compared to the conventional one.
2. Stacking Height 5 to 11mm
The board to board stacking height can be set per 1mm
from 5mm up to 11mm.
3. Flux Swell Prevention
When solder is dipped, the flux swell from the board rear
side is completely prevented.
4. Mis-insertion Prevention and Low
Insertion/Extraction Force Mechanism
The connection area is designed to completely prevent the
mis-insertion.
Moreover, the low insertion/extraction mechanism is
adopted.
qSMT Type
1. Small and Light
The mounting space and weight is reduced about 40%,
compared with the conventional product (HRS FX2 series),
and the mounting area is reduced 80%, compared to the
conventional one.
2. Stacking Height 6 to 11mm
The board to board stacking height can be set per 1mm
from 6mm up to 11mm. In addition, the height can be also
set in combination with the through hole type.
3. Mis-insertion Prevention and Low
Insertion/Extraction Structure
The connection area is designed to completely prevent the
mis-insertion.
Moreover, the low insertion/extraction force mechanism is
adopted.
4. Positioning Boss Selectable
According to the mounting condition, it is selected whether
or not the boss is required. Regarding the boss attached
type, the boss eccentric position can stabilize the mounting
direction.
sApplications
Computers, peripheral equipments, business equipments, etc.
A189

PagesPages 17
Télécharger [ FX4A2-52S-1.27SV ]


Fiche technique recommandé

No Description détaillée Fabricant
FX4A2-52S-1.27SV Stacking Height 5 to 11mm Half Pitch Connector Hirose Electric
Hirose Electric

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche