LFB212G45CG7D227 Datasheet PDF - MuRata
| Part Number | LFB212G45CG7D227 | |
| Description | Chip Multilayer LC Filters | |
| Manufacturers | MuRata | |
| Logo |  |
|
|
There is a preview and LFB212G45CG7D227 download ( pdf file ) link at the bottom of this page. Total 16 Pages | ||
Preview 1 page No Preview Available !
|
| |
 
P4 /15
Spec No. JEMFGB-1357H
7. OTHER SPECIFICATION AND METHODS
No. Items
Specifications
1 Vibration
Appearance No severe damages
Resistance
Electrical
Satisfy specifications listed in
Specifications paragraph 6 over operational
temperature range
Test Methods
Solder specimens on the testing jig (glass
fluorine boards) shown in appended Fig.1 by
a solder. The soldering shall be done either
by iron or reflow and be conducted with care
so that the soldering is uniform and free of
defect such as by heat shock.
Frequency : 10~2000~10 Hz
Acceleration : 196 m/s2
Direction : X,Y,Z 3 axis
Period
: 2 h on each direction
Total 6 h.
2 Shock
Appearance No severe damages
Solder specimens on the testing jig (glass
Electrical
Specifications
Satisfy specifications listed in
paragraph 6 over operational
temperature range
fluorine boards) shown in appended Fig.1 by
a solder. The soldering shall be done either
by iron or reflow and be conducted with care
so that the soldering is uniform and free of
defect such as by heat shock.
Acceleration : 980 m/s2
Period
: 6 ms.
Cycle
: 10 times
3 Deflection
No damage with 2mm deflection Solder specimens on the testing jig (glass
epoxy boards) shown in appended Fig.2 by
a solder. The soldering shall be done either
by iron or reflow and be conducted with care
so that the soldering is uniform and free of
defect such as by heat shock.
4 Soldering strength
(Push Strength)
9.8 N Minimum
Solder specimens onto test jig shown below.
Apply pushing force at 0.5mm/s until
electrode pads are pealed off or ceramics
are broken. Pushing force is applied to
longitudinal direction.
Pushing Direction
Specimen
Jig
5 Solderability of Termination 75% of the terminations is to be Immerse specimens first a ethanol
soldered evenly and continuously. (JIS-K-8101) solution of rosin (JIS-K-5902)
(25% rosin in weight proportion), then in a
solder solution for 2±0.5 s at 230±5 °C.
Preheat
: 100 ~ 120 °C､60 s
Solder Paste : Sn-Ag-Cu
Flux : Solution of ethanol and rosin
(25 % rosin in weight proportion)
MURATA MFG. CO., LTD.
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for LFB212G45CG7D227 electronic component. |
| Information | Total 16 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ LFB212G45CG7D227.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| LFB212G45CG7D227 | The function is Chip Multilayer LC Filters. MuRata | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
LFB2
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||