|
|
Número de pieza | TFT320-1 | |
Descripción | Graphic TFT Display Devices | |
Fabricantes | Vuolas Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TFT320-1 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! USER MANUAL
TFT320-1
Graphic TFT Display Device for Lifts
Part No.
Description
Hardware
Software
Documentation
TFT320-1 & TFT320-2
Graphic TFT Display Devices for Lifts
1.8
2.15
Rev. 1.00
Vuolas Electronics Oy Ltd.
Kunnansarka 2
FIN-37150 Nokia, Finland
Tel. +358 (0)3 342 6900
Fax +358 (0)3 342 5800
e-mail: [email protected]
Vuolas Electronics Oy Ltd.
Rev. 1.00
May 2007
Page 1 of 11
1 page USER MANUAL
TFT320-1
Graphic TFT Display Device for Lifts
Parallel Control Interface
Presentation running on TFT320 can be controlled in real-time by means of
Parallel Control Interface. It has 6-bit input for coded status control, 7 on/off
inputs for the symbol control and 2 inputs for audio control. One of the inputs
belongs either to the coded status control or to the symbol control, so that total
amount of input lines is 14.
Coded status input is 6-bit wide, so it covers the range 0…63. But if B5 input is
assigned to symbol control, coded status input is 5-bit wide, covering the range
0…31. Coding is selectable: bin, Gray, 1/n, 7-segment
Symbol control input is divided to two groups. J5 / 7…10 are individual inputs;
each of them can trigger appearance of an individual object (only one symbols
is displayed at a time). They have priority: pin 9 overrides pin 10, pin 8
overrides pins 9 and 10, etc. So that pin 7 has the highest priority. Objects
triggered by the symbol inputs always appear as foremost item, covering any
information that previously existed in that position.
Note For lift applications “fire alarm” is the factory default object for SYM1, “overweight” for
SYM2 and “service” for SYM3.
The other symbol control input group consists of J5 / 6,13,14 inputs. They can
be understood as a 3-bit binary input with exception, that pin 6 can’t trigger
appearance of any object by itself. It can only change the object that is triggered
by pin 13 or pin 14 to its prior assigned alternative (another object). Pin 6 has
no effect if pins 13 and 14 are both in the same (active or inactive) state.
Please refer to application specific “Setup file” -documentation for practical
information and assistance on your application area.
Serial Control Interfaces
VEBUS
VEBUS is a serial communication port based on RS-485. Two protocol levels
are available, levels 1.0 and 2.0. The VEBUS 1.0 is for one-way
communication only. We recommend the level 2.0 protocol, because it supports
the configuration and downloading of the images. Driver boards are available
for the VEBUS 1.0 and VEBUS 2.0. See the documents of these boards for the
detailed specification of the bus.
SPI
SPI is a serial communication port for Kone compatible systems.
Vuolas Electronics Oy Ltd.
Rev. 1.00
May 2007
Page 5 of 11
5 Page USER MANUAL
TFT320-1
Graphic TFT Display Device for Lifts
o Symbol control inputs
• 4 inputs for the symbol indications control
• 2 inputs for the gong control (GONG UP, GONG DOWN)
• 2 inputs for arrow direction control (ARR-UP, ARR-DOWN)
• 1 input that activates arrow scrolling (MOVE)
• Programming interface, J3
o RS-232 serial interface for TFTtool cable
• Serial control interface, J8
o VEBUS connector based on RS-485
• Optional SPI interface, J6
• Loudspeaker output, J7
o Speaker impedance: 8...32 Ω
o Adjustable volume using setup menu and/or setup file
• External lanterns J4 and J14
o Low driving outputs for LEDs or lamps, max 100 mA
Configuration
• TFTTool application build-up software
o All graphics are editable with a PC
o Requires TFTTool software and a cable, also picture editing software is
needed
o Configuration easily by editing the layout text file
o For additional information, refer to the TFTTool documentation
Size and environment
• Physical dimensions: With case 150 mm x 140 mm x 32 mm, without case 144 mm x
135 mm x 28 mm
• Tolerances: ±0.3 mm
• Weight: 550g with case.
• Operation environment:
o Temperature: 0…70 °C
o Dry environment, RH: <85% (no condensation)
o Not to be used in wet, moist or dusty environment
Disclaimer
Vuolas Electronics reserves the right to change the product and/or specifications and
functions without notice.
Copyright
Copyright 2007 Vuolas Electronics Oy Ltd. All rights reserved.
Vuolas Electronics Oy Ltd.
Rev. 1.00
May 2007
Page 11 of 11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet TFT320-1.PDF ] |
Número de pieza | Descripción | Fabricantes |
TFT320-1 | Graphic TFT Display Devices | Vuolas Electronics |
TFT320-2 | Graphic TFT Display Devices | Vuolas Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |