DataSheetWiki


GC4494 fiches techniques PDF

Microsemi Corporation - HIGH VOLTAGE PIN DIODES

Numéro de référence GC4494
Description HIGH VOLTAGE PIN DIODES
Fabricant Microsemi Corporation 
Logo Microsemi Corporation 





1 Page

No Preview Available !





GC4494 fiche technique
TOC
Control Devices
HIGH VOLTAGE PIN DIODES
DESCRIPTION
The GC4400 series are high voltage, high power (cath-
ode base) PIN diodes. These high resistivity silicon de-
vices are passivated with silicon dioxide for high stability
and reliability and have been proven by thousands of de-
vice hours in high reliability systems.
Each device can withstand storage temperatures from
-65° to +200°C and will operate over the range from -55°
to +150°C. All devices meet or exceed military environ-
mental specifications of MIL-S-19500.
The GC4400 series will operate typically with +50 mA
forward bias. Breakdown voltages are available up to
1000 volts.
APPLICATIONS
The GC4400 series can be used in RF circuits as an on/off
element, as a switch, or as a current controlled resistor in
attenuators extending over the frequency range from
UHF through Ku band.
Switch applications include high speed switches (ECM
systems), TR or lobing switches, channel or antenna se-
lection switches (telecommunications), duplexers (ra-
dar) and digital phase shifters (phased arrays).
The GC4400 series can be used in RF circuits as an on/off
at moderate RF power levels.
Attenuator type applications include amplitude modulators,
AGC attenuators, power levelers and level set attenuators.
ELECTRICAL SPECIFICATIONS: TA = 25°C
MODEL
NUMBER
GC4410
GC4411
GC4412
!
GC4413
GC4430
GC4431
GC4432
!
GC4433
GC4490
GC4491
GC4492
!
GC4493
GC4494
GC4495
BREAKDOWN VOLTAGE
(IR = 10µA MAX)
VB (MIN)(Volts)
100
100
100
100
300
300
300
300
1000
1000
1000
1000
1000
1000
JUNCTION
CAPACITANCE1
CJ-50 (MAX)
(pF)
0.10
0.25
0.50
0.75
0.10
0.25
0.50
0.75
0.10
0.25
0.50
0.75
1.3
2.5
2
SERIES RESISTANCE
(100mA, 100 MHz)
RS100 (MAX)
(Ohms)
0.6
0.5
0.4
0.3
1.5
1.2
1.0
0.8
1.5
1.2
1.0
0.8
.35
.3
CARRIER LIFETIME
(IR = 6mA, IF = 10mA)
TL (TYP)
(µsec)
.2
.5
.7
1.0
.5
1.0
1.5
2.0
1.0
2.0
3.0
5.0
6.0
7.5
THERMAL RESISTANCE
(MAX)
(°C/W)
40
25
20
10
40
30
20
10
30
25
20
10
7
5
Notes:
1. Capacitance is measured at 1 MHz and -50 volts.
2. Resistance is measured using transmission loss techniques.
3. These devices are not available in all case styles. Please consult the factory. specific package styles offered.
The tabulated specifications above are for case style 30.
Diodes are also available in various chip configurations.
Each type offers trade offs in series resistance, junction
capacitance, carrier lifetime and breakdown voltage; the
proper choice of which depends on the end application.
Reverse polarity diodes (NIP) and faster speed PIN and
NIP diodes are also available. (See data sheets for
GC4500, GC4200, and GC4300 series respectively.)
RATINGS
Maximum Leakage Current: 0.5µA at 80% of minimum
rated breakdown
Operating Temperature: -55°C to +150°C
Storage Temperature:
-65°C to +200°C
SEMICONDUCTOR OPERATION
75 Technology Drive • Lowell, MA 01851 • Tel: 978-442-5600 • Fax: 978-937-3748
75

PagesPages 2
Télécharger [ GC4494 ]


Fiche technique recommandé

No Description détaillée Fabricant
GC4490 HIGH VOLTAGE PIN DIODES Microsemi Corporation
Microsemi Corporation
GC4491 HIGH VOLTAGE PIN DIODES Microsemi Corporation
Microsemi Corporation
GC4492 HIGH VOLTAGE PIN DIODES Microsemi Corporation
Microsemi Corporation
GC4493 HIGH VOLTAGE PIN DIODES Microsemi Corporation
Microsemi Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche