|
|
Numéro de référence | GBJ10J | ||
Description | GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes) | ||
Fabricant | Pan Jit International Inc. | ||
Logo | |||
1 Page
DATA SHEET
GBJ10A~GBJ10K
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes
FEATURES
• Plastic material has Underwriters Laboratory
Flammability Classification 94V-O
• Ideal for printed circuit board
• Reliable low cost construction utilizing molded plastic technique
• Surge overload rating: 200 Amperes peak
• High temperature soldering guaranteed:
260°C/10 seconds/.375"(9.5mm) lead length at 5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Reliable low cost construction utilizing
molded plastic technique
Terminals: Leads solderable per MIL-STD-202,
Method 208
Mounting position: Any
Mounting torque: 5 in. lb. Max.
Weight: 0.15 ounce, 4.0 grams
0.087(2.2)
0.070(1.8)
0.044(1.1)
0.035(0.9)
0.304(7.7)
0.288(7.3)
GBJ
0.996(25.3)
0.972(24.7)
Unit: inch ( mm )
0.189(4.8)
0.173(4.4)
0.150(3.8)
0.133(3.4)
0.115(2.9)
0.098(2.5)
0.304(7.7)
0.288(7.3)
0.304(7.7)
0.288(7.3)
0.032(0.8)
0.024(0.6)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Input Voltage
Maximum DC Blocking Voltage
GBJ10A GBJ10B GBJ10D GBJ10G GBJ10J GBJ10K
50 100 200 400 600 800
35 70 140 280 420 560
50 100 200 400 600 800
Maximum Average Forward TC=100°C
Rectified Output Current TA= 45°C
I2t Rating for fusing ( t<8.3ms)
Peak Forward Surge Current single sine-wave superimposed on rated load
(JEDEC method)
10.0
8.0
166
200
Maximum Instantaneous Forward Voltage Drop per element at 5.0A
Maximum Reverse Leakage at rated TA=25°
CDc Blocking Voltage per element TC=100°C
Typical Thermal Resistance per leg(Note 2) RθJA
1.0
5
500
18.0
Typical Thermal Resistance per leg(Note 3) RθJC
3.0
Operating and Storage Temperature Range, TJ,TSTG
-55 to +150
UNIT
V
V
V
A
A2sec
Apk
Vpk
µA
µA
°C / W
°C / W
°C
NOTES:
1. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.
2. Units Mounted in free air, no heatsink, P.C.B at 0.375"(9.5mm) lead length with 0.5 x 0.5"(12 x 12mm)copper pads.
3. Units Mounted on a 3.0 x 3.0" x 0.11" thick ( 7.5 x 7.5 x 0.3cm) AL plate.
DATE : AUG.29.2002
PAGE . 1
|
|||
Pages | Pages 2 | ||
Télécharger | [ GBJ10J ] |
No | Description détaillée | Fabricant |
GBJ10005 | 10A GLASS PASSIVATED BRIDGE RECTIFIER | Diodes Incorporated |
GBJ10005 | 10 Amp Glass Passivated Bridge Rectifier 50 to 1000 Volts | Micro Commercial Components |
GBJ10005 | Glass Passivated Bridge Rectifiers | SeCoS |
GBJ10005 | 10A Glass Passivated Bridge Rectifier | LGE |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |