|
|
Número de pieza | GP2W2001YK | |
Descripción | IrDA Control Infrared Transceiver for Peripheral Type 1 | |
Fabricantes | Sharp Electrionic Components | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GP2W2001YK (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! ELECTRONIC COMPONENTS
SHARP IrDA Control Infrared Transceiver
GP2W2001YK
IrDA Control Infrared Transceiver
for Peripheral Type 1
Revision 1.1.1
November 26, 1998
SHARP CORPORATION
SHARP Electronic Components
Rev. 1.1.1 November 26, ‘98
1
1 page ELECTRONIC COMPONENTS
SHARP IrDA Control Infrared Transceiver
3. Package Outline Dimensions (TENTATIVE)
17.5
14.0
(7.6)
(6.3)
SHIELD CASE
0.45
1.27
(0.89)
0.25
(2.1)
(0.84)
2.5
1.3
0.9
3.35
(1.25)
2.0
UNIT: mm
1. Unspecified tolerance shall be ± 0.3(mm).
2. Resin burr shall not be included in outline dimensions.
3. Package Material : Visible Light Cut-off Resin (Color: Black)
4. Pin Assignment : See “Pinout” for details.
5. Lead pitch distance represents that of the lead root.
6. The appearance of the shieled case is TENTATIVE, and is subject to change without notice.
4. Absolute Maximum Ratings
Parameter
Symbol Min. Max. Units
Conditions
Supply Voltage
Operating Temperature
Storage Temperature
Average Forward LED Current
Peak Forward LED Current
Transmitter Data Input Current
Receiver Data Output Voltage
Soldering Temperature
(NOTES)
VCC
TOP
TST
ILED (DC)
ILED (PF)
ITXD
VO
TSOL
0
-10
-20
-
-
-
-
-
6.0 V
70 oC
85 oC
60 mA
600 mA *1
5.0 mA
VCC V
260 oC *2 , For 5s
1. The derating curve of peak forward current vs. ambient temperature is shown in section 11, figure 11.1.
2. The soldering should be done at the distance from 1.3mm from the resin edge of the transceiver module.
SHARP Electronic Components
Rev. 1.1.1 November 26, ‘98
5
5 Page ELECTRONIC COMPONENTS
SHARP IrDA Control Infrared Transceiver
LIFE SUPPORT POLICY
SHARP components should not be used in medical devices with life support functions or in safety equipment (or
similar applications where component failure result in loss of life or physical harm) without the written approval of an
officer of the SHARP Corporation.
SHARP reserves the right to make changes in specifications at any time and without notice. SHARP does not assume
any responsibility for the use of any circuitry described; no circuit patent licenses are implied.
SHARP Electronic Components
Rev. 1.1.1 November 26, ‘98
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet GP2W2001YK.PDF ] |
Número de pieza | Descripción | Fabricantes |
GP2W2001YK | IrDA Control Infrared Transceiver for Peripheral Type 1 | Sharp Electrionic Components |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |