No Preview Available !
PRODUCT SPECIFICATION
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
MODEL NO.: V236BJ1
SUFFIX: LE2
Customer:
APPROVED BY
Name / Title
Note
SIGNATURE
Please return 1 copy for your confirmation with your
signature and comments.
Approved By
Checked By Prepared By
Chao-Chun Chung Ying-Ping Lee Bowei Huang
Version 2.0
1 Date:18 Sep. 2013
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V236BJ1-LE2 is a 23.6” TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins 1ch-LVDS
interface. This module supports 1366 x 768 HDTV format and can display up to 16.7M (8 bit) colors. The
converter module for Backlight is not built in.
1.2 FEATURES
- High brightness (250 nits)
- High contrast ratio (3000:1)
- Fast response time (Gray to gray average 8.5 ms)
- High color saturation (NTSC 72%)
- HDTV (1366 x 768 pixels) resolution, true HDTV format
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
- Optimized response time for 60 Hz frame rate
- Ultra wide Viewing Angle: Super MVA Technology
- RoHS compliance.
1.3 APPLICATION
- Personal TV /Public Display Application
- Home Theater Application
- MFM Application
1.4 GENERAL SPECIFICATIONS
Item
Specification
Unit Note
Active Area
Bezel Opening Area
521.4705 (H) x 293.184 (V)
525.22 (H) x 297.22 (V)
mm
(1)
mm
Driver Element
a-si TFT active matrix
--
Pixel Number
1366 x R.G.B. x 768
pixel -
Pixel Pitch(Sub Pixel)
0.12725 (H) x 0.38175 (V)
mm -
Pixel Arrangement
RGB vertical stripe
--
Power consumption
22.849 (Max.) [Cell PW 6.349W (Max.) + BLU PW 16.50 (Max.)]
Watt (2)
Display Colors
16.7M
color -
Display Operation Mode Transmissive Mode / Normally Black
--
Surface Treatment
Anti-Glare coating (Haze 1.0%),Hard coating (3H)
--
Note (1) Please refer to the attached drawings in chapter 11 for more information about the front and back outlines.
Note (2) Please refer sec 3.1 and 3.2 for more information of Power consumption.
Version 2.0
5 Date:18 Sep. 2013
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Note (5) The LVDS input characteristics are as follows :
3.2 BACKLIGHT CONNECTOR PIN CONFIGURATION
3.2.1 LED LIGHT BAR CHARACTERISTICS
Parameter
Symbol
LED Light Bar Input
Voltage Per Input Pin
LED Light Bar Current
Per Input Pin
VPIN
IPIN
Power consumption
PBL
LED Life time
LLED
Min.
---
---
---
30,000
Value
Typ.
31.23
230
14.5
-
Max.
35.55
243.8
16.5
-
(Ta = 25 ± 2 ºC)
Unit Note
(1),
V Duty=100%,
IL =230mA
(1), (2)
mA Duty=100%
(1), (2)
W Duty=100%,
IL =230mA
Hrs (3)
Note (1)LED light bar input voltage and current are measured by utilizing a true RMS multimeter as shown
below:
Note (2)PBL(Typ.)= IPIN(Typ.) × VPIN(Typ.) × ( 2 ), PBL(Max.)= IPIN(Typ) × VPIN(Max.) × ( 2 ) input pins ,
Note (3)The lifetime of LED is defined as the time when LED packages continue to operate under the
conditions at Ta = 25 ±2 ℃ and (I= 230mA) (per chip) until the brightness becomes ≦ 50% of its
original value.
Power supply
Function
generator
INX Converter
With PWM
Function
VPIN1, IPIN1
VPIN2 , IPIN2
LED Backlight Module
Version 2.0
11 Date:18 Sep. 2013
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited