|
|
PDF T370XW02-V2 Data sheet ( Hoja de datos )
| Número de pieza | T370XW02-V2 | |
| Descripción | Color TFT-LCD Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de T370XW02-V2 (archivo pdf) en la parte inferior de esta página. Total 21 Páginas | ||
|
No Preview Available !
Global LCD Panel Exchange Center
www.panelook.com
Document Version: 1.0
Date:2006/12/1
Product Functional Specification
37” Color TFT-LCD Module
Model Name: T370XW02 V2
(QDI Model: QD37WL0102)
() Preliminary Specification
(*) Final Specification
PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page  
Global LCD Panel Exchange Center
www.panelook.com
1. Application
This specification applies to a color TFT-LCD module QD37WL01
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is
composed of a color TFT-LCD panel; driver ICs, control circuit and power supply circuit and a backlight unit. Graphics
and texts can be displayed on a 1366 3 768 dots, Wide XGA mode, with 16,777,216 colors by using 8-bit 1 channel
LVDS (Low Voltage Differential Signaling) to interface and +12V DC supply voltage for TFT-LCD panel driving.
The TFT-LCD panel used for this module has wide view angles and fast response time. Display mode is normally
black. Each pixel is divided into Red, Green and Blue sub-pixels, which are arranged in vertical strips. A low-reflection
surface treatment and high-color-saturation type color filter are also used for this panel. Therefore, this module is
suitable for the multimedia use. Especially TV can be obtained by using this module.
[Features]
1) High contrast image. (1200:1)
2) High brilliant image. (500 nits)
3) Wide viewing angle. (88/88/88/88)
4) Fast response time. (25ms)
5) High color saturation. (NTSC 72%)
6) WXGA resolution. (1366x768)
7) LVDS interface. (8-bit 1 channel)
3. General Specification
Parameter
Display size
Active area
Pixel format
Pixel size
Pixel configuration
Color depth
Luminance (Center point typ.)
Contrast Ratio
View angle
Display mode
Unit outline dimensions (typ.)*1
Weight (Max.)
Surface treatment
Lamp Quantity
*1.Note : excluding backlight cables.
Specifications
37.02” Diagonal
819.6X460.8
1366 (H) 768 (V) ; (1 pixel = R+G+B dots)
0.6 (H) × 0.6 (V)
R, G, B vertical stripe
16.7M colors
500
1200:1
Typ. 88/88/88/88
Normally Black
877X516.8X54(inverter cover)
10000
AG (13%), 3H
Direct 18 Lamps
Unit
inch
mm
Pixel
mm
Cd/m2
mm
g
pcs
PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page 
Global LCD Panel Exchange Center
www.panelook.com
Note.1 Luminance ratio is linearly controllable in the range of the following table.
BTRI Voltage (VBI)
Luminance ratio
0V 20% (Minimum)
3.3V
100% (Maximum)
(1) ADIM is control signal for Inverter’s output Power to Back Light Lamp Bulb. Input Signal should be able to control
Amplitude of Inverter Output voltage. From 0V to 3.3V, Inverter Output Voltage should be able to vary to control
Brightness of Lamp from 80% to 120% Luminescence variation.
(2) PDIM is PWM control input; i.e. for the given ADIM, this PDIM input should be able to control Width of Voltage Burst
of inverter output for Lamp Driving. This input can have two type of input; Ordinary default setting is Duty Signal
Input with 3.3V TTL specification. The other setting will be DC level signal using Saw Tooth Wave control for PWM duty
control. These two method should be decided by 14th Pin input setting.
(3) 14 Pin is selection pin for PWM control method; if this pin NC or GND, PDIM input of 13th Pin should be direct Duty
Signal Input for PWM control. If this is set to High, 13th Pin should have DC level signal and inverter should have Saw
Tooth Wave Generator for PWM.
Rear view of LCM
PC
14
1
S14B-PH-SM3-TB(JST)
PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page | ||
| Páginas | Total 21 Páginas | |
| PDF Descargar | [ Datasheet T370XW02-V2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| T370XW02-V0 | LCD Module | AUO |
| T370XW02-V1 | LCD Module | AUO |
| T370XW02-V2 | Color TFT-LCD Module | AUO |
| T370XW02-V5 | LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |