|
|
Número de pieza | LTM15C458-11 | |
Descripción | TFT LCD Module | |
Fabricantes | Toshiba | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LTM15C458-11 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Revision History
Date
’01-10-29
Sheet
(New)
NEW
Specification No.
Item Old
Sheet 1
New
Reason
LIQUID CRYSTAL DISPLAY DIVISION
Date:2001-10-29 New No.NR-LTM15C458-11
Date:
Old No.
←# Special ←& Addition ← Change
1 page Specification No.
Sheet 5
(11) Be careful not to pull the FL cables of the backlight in order to avoid mechanical damage in FL lamp and soldering area.
Be careful not to pull or not to hurt the FPC (Flexible Printed Circuit) cables.
(12) Power supplies should always be turned off in assembling process.
Do not connect or disconnect the power cables and connectors with power applied to LCD module. This may cause
damage of module circuit.
The signal should be applied after power are turned on. And the signal should be removed before power supplies are
turned off. (Refer to "For Designing The System"(2).)
(13) In case of LCD long period operation, discoloration of light guide or optical sheet will be happened due to ultra violet
and heat from CCFL. As the result, there is possibility to have out of specification for the optical characteristics
as “5.2”. But this is not irregular phenomena.
Moreover, CCFL also has the characteristic of color shift by long period operation.
For Transportation and Storage
(1)
(2)
✳(3)
(4)
Do not store LCD module in high temperature, especially in high humidity for a long time (approximately more than one
month).
It is recommended to store LCD module where the temperature is in the range of 0 to 35 and the relative humidity is
lower than 70%.
Store LCD module without exposure to direct sunlight or fluorescent lamps in order to prevent the module from strong
ultra violet ray.
Avoid condensation of water on LCD module, otherwise it may cause miss-operation or defects. Keep away LCD module
from such ambient.
In case of transportation of storage after opening the original packing. LCD module are recommended to be repacked into
the original packaging with the same method, especially with same kind of desiccant.
LIQUID CRYSTAL DISPLAY DIVISION
Date:2001-10-29 New No.NR-LTM15C458-11
Date:
Old No.
←# Special ←& Addition ← Change
5 Page Specification No.
2.4 Electrical Specifications
2.4.1 Circuit Diagram
CN1
Panel
Controller
&
1ch-LVDS
DC/DC
Converter
Gray scale
Manipulation
Voltage
Generation
C irc u it
Sheet 11
Back Light
Back Light
X - Driver
CN2
CN3
Liquid Crystal Panel
1024 × 768 Pixels
Back Light
Back Light
CN4
CN5
2.4.2 Sequence of Power Supplies and Signals
10ms (Max.)
10ms (Max.) 500ms (Min.)
V DD
RxCK+/-
RxIN0+/-
RxIN2+/-
RxIN3+/-
0.2V
3.0V
40ms (Max.)
0ms (Min.)
3.0V
40ms (Max.)
0ms (Min.)
0.2V
0.2V
VTH
VOS
VTL
250ms (Min.)
FL Input Voltage
10% VSFL
1sec (Min.)
10% VFL
0ms (Min.)
VSFL
VFL
LIQUID CRYSTAL DISPLAY DIVISION
Date:2001-10-29 New No.NR-LTM15C458-11
Date:
Old No.
←# Special ←& Addition ← Change
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet LTM15C458-11.PDF ] |
Número de pieza | Descripción | Fabricantes |
LTM15C458-11 | TFT LCD Module | Toshiba |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |