DataSheetWiki


UCY2E560MHD fiches techniques PDF

Nichicon - Aluminum Electrolytic Capacitor

Numéro de référence UCY2E560MHD
Description Aluminum Electrolytic Capacitor
Fabricant Nichicon 
Logo Nichicon 





1 Page

No Preview Available !





UCY2E560MHD fiche technique
ALUMINUM ELECTROLYTIC CAPACITORS
CY Miniature Sized, High Ripple Current, High Reliability
series
High ripple current and Long Life product withstanding
load life of 8000 to 10000 hours at +105°C.
Suited for ballast application.
Compliant to the RoHS directive (2002/95/EC).
CS
Smaller
CY
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Performance Characteristics
40 to +105°C
160 to 400V
6.8 to 560µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA)
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
Measurement frequency : 120Hz, Temperature : 20°C
160 200 250 350 400
0.20
0.20
0.20
0.24
0.24
Stability at Low Temperature
Rated voltage (V)
Z25°C / Z+20°C
Impedance ratio ZT / Z20 (MAX.) Z40°C / Z+20°C
Measurement frequency : 120Hz
160 200 250 350 400
33355
66666
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after D.C. bias plus rated
ripple current is applied for 10000 hours (8000 hours for
φD=10) at 105˚C, the peak voltage shall not exceed the rated
voltage.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
L +1.5MAX.
15 MIN
4 MIN
(mm)
φD 10 12.5 16 18
P 5.0 5.0 7.5 7.5
φd 0.6 0.6 0.8 0.8
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 250V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12
U CY 2 E 1 0 1 M HD T
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (100µF)
Rated voltage (250V)
Series name
Type
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
10 PD
12.5 to 18
HD
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z

PagesPages 2
Télécharger [ UCY2E560MHD ]


Fiche technique recommandé

No Description détaillée Fabricant
UCY2E560MHD Aluminum Electrolytic Capacitor Nichicon
Nichicon

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche