|
|
PDF AFEM-S106 Data sheet ( Hoja de datos )
| Número de pieza | AFEM-S106 | |
| Descripción | 5 GHz WiFi FEM | |
| Fabricantes | Avago Technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AFEM-S106 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
AFEM-S106
5 GHz WiFi FEM
Data Sheet
Description
Avago Technologies AFEM-S106 WiFi FEM includes power
amplifier, directional coupler, power detector and SPDT
antenna switch. It is designed for mobile and fixed wireless
data applications in the 5.1 to 5.9 GHz frequency ranges.
The PA is optimized for IEEE 802.11 a/n WiFi modulation.
The PA exhibits flat gain and good match while providing
linear power efficiency to meet stringent mask conditions.
It utilizes Avago Technologies proprietary GaAs Enhance-
ment-mode pHEMT technology for superior performance
across voltage and temperature levels.
The AFEM-S106 is packaged in a 3.2 x 3.2 x 0.6 mm size for
space-constrained applications.
Functional Block Diagram (Top View)
RX GND SW1 CPLR
14 13 12 11
GND GND
1 10
TX ANT
29
PAEN
3
BIAS NETWORK
GND VBIAS VDD
45 6
GND
8
SW0
7
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 50 V
ESD Human Body Model = 200 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Features
50 Ω all RF ports
Integrated directional coupler, -17 dB coupling factor,
> 14 dB directivity
Integrated power detector
High Tx – Rx switch isolation
3 to 4.2V supply
Small size: 3.2 x 3.2 x 0.6 mm
Stable under all loads or conditions
Gain of 28dB
Meets 802.11a/n emission mask requirements @
15dBm
Meets FCC 15.205 emission requirements @ 15dBm
EVM < -31.5dB at 15dBm, < -35dB at 12dBm
Idd < 105mA @ 15dBm Pout
PAE(PA) > 20% @Pout (ANT) = 15dBm
Only 1 external component required
Applications
Portable WiFi applications
WiFi Access points
Package Diagram (Bottom View)
4567
GND VBIAS VDD SW0
3
PAEN
0.30
0.30
2
TX
1
GND
BOTTOM VIEW
GND
8
GND
9
ANT
1.60 3.20
10
GND
14 13 12 11
RX GND SW1 CPLR
1.60
3.20
1 page  
Marking Specification
AVAGO
6FWWYY
XXXX
“6” = Device Code
“F” = Manufacturing code
“WW” = Build of Work Week
“YY” = Build of Year
“XXXX” = Last 4 Digits of Assembly Lot Number
Note: Package marking provides Orientation and Identification
Device Orientation & Pin 1 Location In Tape
REEL
USER FEED DIRECTION
USER
FEED
DIRECTION
COVER TAPE
Tape Dimensions
CARRIER
TAPE
TOP VIEW
END VIEW
Notes:
1. Ao & Bo measured at 0.3 mm above base of pocket.
2. 10 pitches cumulative tol. ±0.2 mm.
3. ( ) Reference dimensions only.
5
Ao:
Bo:
Ko:
Pitch:
Width:
3.60
3.60
0.95
8.00
12.00
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet AFEM-S106.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AFEM-S102 | 2.5 GHz WiFi/BT FEM | Avago Technologies |
| AFEM-S105 | 5 GHz WiFi FEM | Avago Technologies |
| AFEM-S106 | 5 GHz WiFi FEM | Avago Technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |