DataSheetWiki


GS84018AT-180 fiches techniques PDF

ETC - 256K x 18/ 128K x 32/ 128K x 36 4Mb Sync Burst SRAMs

Numéro de référence GS84018AT-180
Description 256K x 18/ 128K x 32/ 128K x 36 4Mb Sync Burst SRAMs
Fabricant ETC 
Logo ETC 





1 Page

No Preview Available !





GS84018AT-180 fiche technique
TQFP, BGA
Commercial Temp
Industrial Temp
Preliminary
GS84018/32/36AT/B-180/166/150/100
256K x 18, 128K x 32, 128K x 36 180 MHz–100 MHz
4Mb Sync Burst SRAMs
3.3 V VDD
3.3 V and 2.5 V I/O
Features
• FT pin for user-configurable flow through or pipelined
operation
• Single Cycle Deselect (SCD) operation
• 3.3 V +10%/–5% core power supply
• 2.5 V or 3.3 V I/O supply
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
• Default to Interleaved Pipelined mode
• Byte Write (BW) and/or Global Write (GW) operation
• Common data inputs and data outputs
• Clock control, registered, address, data, and control
• Internal self-timed write cycle
• Automatic power-down for portable applications
• JEDEC standard 100-lead TQFP or 119-Bump BGA package
Pipeline
3-1-1-1
Flow
Through
2-1-1-1
tCycle
tKQ
IDD
tKQ
tCycle
IDD
–180
5.5 ns
3.0 ns
185 mA
8 ns
9.1 ns
115 mA
–166
6.0 ns
3.5 ns
170 mA
8.5 ns
10 ns
105 mA
–150
6.6 ns
3.8 ns
155 mA
10 ns
12 ns
100 mA
–100
10 ns
4.5 ns
105 mA
12 ns
15 ns
80 mA
Functional Description
Applications
The GS84018/32/36A is a 4,718,592-bit (4,194,304-bit for
x32 version) high performance synchronous SRAM with a 2-
bit burst address counter. Although of a type originally
developed for Level 2 Cache applications supporting high
performance CPUs, the device now finds application in
synchronous SRAM applications ranging from DSP main store
to networking chip set support. The GS84018/32/36A is
available in a JEDEC standard 100-lead TQFP or 119-Bump
BGA package.
Controls
Addresses, data I/Os, chip enables (E1, E2, E3), address burst
control inputs (ADSP, ADSC, ADV), and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Flow Through/Pipeline Reads
The function of the Data Output register can be controlled by
the user via the FT mode pin/bump (pin 14 in the TQFP and
bump 5R in the BGA). Holding the FT mode pin/bump low
places the RAM in Flow Through mode, causing output data to
bypass the Data Output Register. Holding FT high places the
RAM in Pipelined mode, activating the rising-edge-triggered
Data Output Register.
SCD Pipelined Reads
The GS84018/32/36A is an SCD (Single Cycle Deselect)
pipelined synchronous SRAM. DCD (Dual Cycle Deselect)
versions are also available. SCD SRAMs pipeline deselect
commands one stage less than read commands. SCD RAMs
begin turning off their outputs immediately after the deselect
command has been captured in the input registers.
Byte Write and Global Write
Byte write operation is performed by using byte write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the Byte Write
control inputs.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(High) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Core and Interface Voltages
The GS84018/32/36A operates on a 3.3 V power supply and
all inputs/outputs are 3.3 V- and 2.5 V-compatible. Separate
output power (VDDQ) pins are used to de-couple output noise
from the internal circuit.
Rev: 1.12 7/2002
1/31
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 1999, Giga Semiconductor, Inc.

PagesPages 30
Télécharger [ GS84018AT-180 ]


Fiche technique recommandé

No Description détaillée Fabricant
GS84018AT-180 256K x 18/ 128K x 32/ 128K x 36 4Mb Sync Burst SRAMs ETC
ETC
GS84018AT-180I 256K x 18/ 128K x 32/ 128K x 36 4Mb Sync Burst SRAMs ETC
ETC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche