|
|
PDF NEO-6 Data sheet ( Hoja de datos )
| Número de pieza | NEO-6 | |
| Descripción | 6 GPS Modules | |
| Fabricantes | u-blox | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NEO-6 (archivo pdf) en la parte inferior de esta página. Total 25 Páginas | ||
|
No Preview Available !
NEO-6
u-blox 6 GPS Modules
Data Sheet
Abstract
Technical data sheet describing the cost effective, high-performance
u-blox 6 based NEO-6 series of GPS modules, that brings the high
performance of the u-blox 6 positioning engine to the miniature
NEO form factor.
These receivers combine a high level of integration capability with
flexible connectivity options in a small package. This makes them
perfectly suited for mass-market end products with strict size and
cost requirements.
16.0 x 12.2 x 2.4 mm
www.u-blox.com
1 page  
NEO-6 - Data Sheet
1 Functional description
1.1 Overview
The NEO-6 module series is a family of stand-alone GPS receivers featuring the high performance u-blox 6
positioning engine. These flexible and cost effective receivers offer numerous connectivity options in a miniature
16 x 12.2 x 2.4 mm package. Their compact architecture and power and memory options make NEO-6 modules
ideal for battery operated mobile devices with very strict cost and space constraints.
The 50-channel u-blox 6 positioning engine boasts a Time-To-First-Fix (TTFF) of under 1 second. The dedicated
acquisition engine, with 2 million correlators, is capable of massive parallel time/frequency space searches,
enabling it to find satellites instantly. Innovative design and technology suppresses jamming sources and
mitigates multipath effects, giving NEO-6 GPS receivers excellent navigation performance even in the most
challenging environments.
1.2 Product features
Table 1: Features of the NEO-6 Series
All NEO-6 modules are based on GPS chips qualified according to AEC-Q100. See Chapter 5.1 for further
information.
GPS.G6-HW-09005-E
Page 5 of 25
5 Page 
NEO-6 - Data Sheet
1.14.3 Power Save Mode
Power Save Mode (PSM) allows a reduction in system power consumption by selectively switching parts of the
receiver on and off.
Power Save mode is not available with NEO-6P, NEO-6T and NEO-6V.
1.15 Configuration
1.15.1 Boot-time configuration
NEO-6 modules provide configuration pins for boot-time configuration. These become effective immediately
after start-up. Once the module has started, the configuration settings can be modified with UBX configuration
messages. The modified settings remain effective until power-down or reset. If these settings have been stored
in battery-backup RAM, then the modified configuration will be retained, as long as the backup battery supply is
not interrupted.
NEO-6 modules include both CFG_COM0 and CFG_COM1 pins and can be configured as seen in Table 6.
Default settings in bold.
CFG_COM1
1
1
0
0
CFG_COM0
1
0
1
0
Protocol
NMEA
NMEA
NMEA
UBX
Table 6: Supported COM settings
Messages
GSV, RMC, GSA, GGA, GLL, VTG, TXT
GSV, RMC, GSA, GGA, GLL, VTG, TXT
GSV14, RMC, GSA, GGA, VTG, TXT
NAV-SOL, NAV-STATUS, NAV-SVINFO, NAV-CLOCK,
INF, MON-EXCEPT, AID-ALPSERV
UARTBaud rate
9600
38400
4800
57600
USB power
BUS Powered
Self Powered
BUS Powered
BUS Powered
NEO-6 modules include a CFG_GPS0 pin, which enables the boot-time configuration of the power mode. These
settings are described in Table 7. Default settings in bold.
CFG_GPS0
0
1
Power Mode
Eco Mode
Maximum Performance Mode
Table 7: Supported CFG_GPS0 settings
Static activation of the CFG_COM and CFG_GPS pins is not compatible with use of the SPI interface.
1.16 Design-in
In order to obtain the necessary information to conduct a proper design-in, u-blox strongly recommends
consulting the LEA-6/NEO-6/MAX-6 Hardware Integration Manual [1].
14 Every 5th fix.
GPS.G6-HW-09005-E
Page 11 of 25
11 Page | ||
| Páginas | Total 25 Páginas | |
| PDF Descargar | [ Datasheet NEO-6.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NEO-6 | 6 GPS Modules | u-blox |
| NEO-6G | 6 GPS Modules | u-blox |
| NEO-6M | 6 GPS Modules | u-blox |
| NEO-6P | 6 GPS Modules | u-blox |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |