DataSheetWiki


LB1938FA fiches techniques PDF

ON Semiconductor - Low-saturation Forward/Reverse Motor Driver

Numéro de référence LB1938FA
Description Low-saturation Forward/Reverse Motor Driver
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





LB1938FA fiche technique
Ordering number : ENA2041
LB1938FA
Monolithic Digital IC
1ch, Low-saturation
Forward/Reverse Motor Driver
http://onsemi.com
Overview
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an
ultraminiature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two
input signals, and is an optimal DC motor driver for notebook personal computers, digital cameras, cell phones, and
other portable equipment.
Features
Ultraminiature Micro8 package
The low saturation voltage means that the voltage applied to the motor is higher and IC heat generation is reduced.
This allows this IC to be used in environments with higher ambient operating temperatures.
Output saturation voltage (high side + low side): VOsat = 0.15V typical (IO = 100mA)
The wide usable voltage range and the low standby mode current drain of 0.1 µA make this IC optimal for battery
operated equipment.
There are no constraints on the relationship between the input signal voltage and the supply voltage. For example,
this IC can be use at VCC = 3V and VIN = 5V.
Thermal protection circuit limits the drive current and prevents the IC from causing a fire or being destroyed if the
IC chip temperature reaches or exceeds 180°C due to large currents flowing when the outputs are shorted due to,
for example, motor layer shorting or other phenomena.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
Output current
Output voltage
Input applied voltage
Allowable power dissipation
VCC max
IOUT max
VOUT max
VIH max
Pd max
Mounted on a specified board *
10.5
800
VCC+VSF
10
400
V
mA
V
V
mW
Operating temperature range
Topr
-30 to +85
°C
Storage temperature range
Tstg
-55 to +150
°C
Note *: Mounted on a specified board: 114.3mm×76.1mm×1.5mm, glass epoxy resin, wiring density 20%
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high
current, high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
May, 2013
40412 SY 20120321-S00010 No.A2041-1/5

PagesPages 5
Télécharger [ LB1938FA ]


Fiche technique recommandé

No Description détaillée Fabricant
LB1938FA Low-saturation Forward/Reverse Motor Driver ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche