|
|
PDF VC0706 Data sheet ( Hoja de datos )
| Número de pieza | VC0706 | |
| Descripción | Serial Port Debug User Manual | |
| Fabricantes | VIMICRO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VC0706 (archivo pdf) en la parte inferior de esta página. Total 36 Páginas | ||
|
No Preview Available !
VC0703 串口调试工具使用说明 V1.00
VC0706
Serial port debug
User’s manual
Version 1.00
2008.02.29
Notes1: The information is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Notes2: Not all products and/or types are available in every country. Please check with a Vimicro
sales representative for availability and additional information.
Page 1 of 36
1 page  
Vimicro Corporation
VC0706
Program introduction
This program includes four parts:
z Comm Setting: It is used to communication mode of serial port setting and turn off/on serial port.
z Comm Command：It is used for various commands testing.
z Data Show：It is used to indicate the information from serial port.
z Menu: external program transfer and help information support.
The program interface as follows:
5 of 36
Figure: program interface
Version 1.00
2008-3-19
5
5 Page 
Vimicro Corporation
VC0706
“Mirror Ctrl” button
Click “Mirror Ctrl” button on the main interface to enter the mirror control interface which is shown as follows:
Figure: Mirror control interface
The interface is used to Mirror control operation. It can be used to set the mirror control and display mode.
Interface specification:
z “Ctrl Mode”: It is used to set or display mirror control mode is GPIO control or Serial Port control.
“GPIO Ctrl”: It is used to set mirror control mode as GPIO control.
“UART Ctrl”: It is used to set mirror control mode as Serial Port control.
z “Mirror Mode”: It is used to set and display current mirror mode.
“No Mirror”: It is used to close mirror display.
“Mirror”: It is used to set mirror display.
z “Set Config”: It is used to send the Mirror control command according to current “Ctrl Mode” and “Mirror
Mode” settings.
z “Get Config”: It is used to obtain and display the current mirror mode and display them via “Ctrl Mode” and
“Mirror Mode”.
11 of 36
Version 1.00
2008-3-19
11
11 Page | ||
| Páginas | Total 36 Páginas | |
| PDF Descargar | [ Datasheet VC0706.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VC0702 | TV Camera Processor | VIMICRO |
| VC0706 | Digital Video Processor | VIMICRO |
| VC0706 | Serial Port Debug User Manual | VIMICRO |
| VC0706PREA | Digital Video Processor | VIMICRO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |