DataSheetWiki


HBD040ZGE-A fiches techniques PDF

Power-One - HBD SERIES - DUAL OUTPUT/ 60 WATT

Numéro de référence HBD040ZGE-A
Description HBD SERIES - DUAL OUTPUT/ 60 WATT
Fabricant Power-One 
Logo Power-One 





1 Page

No Preview Available !





HBD040ZGE-A fiche technique
(888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
HBD SERIES - DUAL OUTPUT, 60 WATT
DESCRIPTION
FEATURES
HBD dual output, DC/DC converters feature high
efficiency, 1500 VDC isolation, and open-frame
packaging. The HBD family allows board designers
to deliver any combination of power from
either output, up to each model’s maximum rating.
The HBD is available in 5V/3.3V or 3.3V/2.5V
combinations in either a 24V or 48V input version. The
HBD uses planar magnetics and has an MTBF of over a
million hours.
• Independent Dual Outputs • Independent Trim
• Flexible Load Sharing
For Each Output
• High Efficiency Topology • 1500V Isolation
• Open-Frame Design
• 100°C Baseplate
• Planar Magnetics
Operation
Efficiency vs. Load (24V Input)
85
80
TECHNICAL SPECIFICATIONS
Voltage Range
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
Input
18.00 - 36.00 VDC
34.00 - 75.00 VDC
80 mA
Shunt Diode
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated, Output 1
Line Regulation Vin Min. - Vin Max., Iout Rated, Output 2
Load Regulation Iout Min. - Iout Max., Vin Nom., Output 1
Load Regulation Iout Min. - Iout Max., Vin Nom., Output2
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range (5V/3.3V Units)
Power Limit Threshold Range, % of Iout Rated
OVP Trip Range (Main Ouput)
General
Turn-On Time
Remote Shutdown
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Weight (approx.)
±1%
0.2% Vout
1.0% Vout
0.5% Vout
1.0% Vout
10% Iout Rated
25% Iout
4% Vout
500 µs
±10%
110 - 140%
115 - 140% Vout Nom.
10 ms
Positive Logic
500 kHz
1500 VDC
1050 VDC
500 VDC
0.03%/°C
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
5g
1.3 x 106 Hrs
UL, CUL, VDE
2.4 oz
75
HBD060YGE-A
70 EFF. (18V)
EFF. (24V)
65 EFF. (36V)
60
10 20 30 40 50 60 70 80 90 100
LOAD %
Efficiency vs. Load (48V Input)
85
80
75
70
HBD060ZGE-A
65
HBD040ZGE-A
60 HBD040ZED-A
55
50
10 20 30 40 50 60 70 80 90 100
LOAD %
Notes
1 For negative logic, add suffix “N” to model number.
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
1

PagesPages 3
Télécharger [ HBD040ZGE-A ]


Fiche technique recommandé

No Description détaillée Fabricant
HBD040ZGE-A HBD SERIES - DUAL OUTPUT/ 60 WATT Power-One
Power-One

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche