|
|
PDF HBCS-7154 Data sheet ( Hoja de datos )
| Número de pieza | HBCS-7154 | |
| Descripción | Industrial Digital Bar Code Slot Reader | |
| Fabricantes | Agilent(Hewlett-Packard) | |
| Logotipo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de HBCS-7154 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
H
Industrial Digital Bar Code Slot
Reader
Technical Data
HBCS-7100 Series
Features
• Multi Resolution
Compatible with virtually all bar
code resolutions
• Large Slot Width
Allows reading thickly
laminated cards
• Sealed Metal Case (IP 66/67)
Can be installed outdoors or in
wet environments
• Tamper Proof Design
Ideal for security applications
• Minimal First Bar Distortion
• 880 nm Light
• Wide Operating Temperature
Range
-40°C to +70°C
• Wide Scan Speed Range
• Black Textured Epoxy Finish
• Digital Output
Open collector output compat-
ible with TTL and CMOS logic
• Single +5 Volt Supply
Description
Hewlett-Packard’s Industrial
Digital Slot Reader is designed to
provide excellent scanning
performance on a wide variety of
bar coded cards and badges. It
contains a unique optical/
electrical system that integrates
over a large vertical area of the
bar/space pattern, providing a
greatly improved first read rate
even on poorly printed bar codes.
The HBCS-7100 Series uses an
infrared (880 nm) light with 0.19
mm (0.0075 in.) resolution.
The extra large depth of field
allows the slot reader to have a
slot width of 3.2 mm (0.125 in.),
thus making it possible to read
even thickly laminated cards and
badges. When used as a stand
alone optics module, the
maximum depth of field is
dependent upon resolution.
The optics and electronics are
housed in a rugged metal case.
The case is fully gasketed and
sealed, making it suitable for use
in outdoor or wet environments.
The black epoxy coating adds a
durable, finished look to the
Digital Slot Reader. When
installed using the rear screw
holes, the units become tamper
proof, making an excellent choice
for security access control.
The optical system is centered in
the slot track, allowing the user to
easily scan from either direction.
The wide slot width makes it easy
to insert and slide the cards. The
optical system is covered with a
recessed window to prevent
contamination and reduce the
wear on the cards.
The standard slot reader comes
with the optics module mounted
on a base plate with an opposite
rail and 122 cm (48 in.) straight
cord. Two standard connectors
are available: a male 5 pin, 240°,
locking DIN (HBCS-7100); or a
female, 9 pin D-sub squeeze to
release, (HBCS-7108).
The optics module (HBCS-7150)
is available which can be
integrated into other equipment
or used as a stand alone sensor
assembly.
Applications
The digital bar code slot reader is
a highly effective alternative to
5965-3007E
4-75
1 page  
Dimensions
1.75
(0.69)
M5 x 0.80
TAPPED
HOLE
(2)
3.81
(1.50)
0.32
(0.125)
1.27 (0.50)
0.25 (0.10)
12.70
(5.00)
CABLE
1.75
(0.69)
CABLE
EXIT
11.43
(4.50)
#8-32 TAPPED
HOLE (2)
0.475 (0.187) DIA.
LOCATING PIN (2)
CABLE
2.79
(1.10)
1.65
(0.65)
0.89
(0.35)
2.03 (0.80) DIA.
MAX.
2.79 (1.10) 2.03 (0.80)
1.90 (0.75)
5.21
(2.05)
SLOT READER
(HBCS-7100/7108)
CABLE EXITS (2)
2.03 (0.80)
CABLE
M5 x 0.80
(REF.)
1.90 (0.75)
3.81
(1.50)
1.65 (0.65)
11.43 (4.50)
12.70 (5.00)
1.27 (0.50)
OPTICS MODULE
(HBCS-7150)
Notes:
7. Mounting holes on the HBCS-7100/7108 are suitable for either #10-32 or M5-0.80 screws.
8. Mounting holes on the HBCS-7150 are for #8-32 screws.
9. Slot readers and optics modules have a black textured epoxy finish.
10. All dimensions are nominal and are stated in millimeters and (inches).
Selection Guide
5 pin DIN Connector
9 pin D-Sub Connector
No Connector Strip
and Tin Leads
Individually Boxed
Slot Reader
HBCS-7100
Standard
HBCS-7108
HBCS-7104*
HBCS-7150
Standard
NA
HBCS-7154*
Order Option #A01 with the above referenced part-number. The slot reader
is shipped in a “kraft” box, including an HBCS-7100 series data sheet.
*Build to order product only. Minimum stock available for engineering evaluation purchases.
4-79
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HBCS-7154.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HBCS-7150 | Industrial Digital Bar Code Slot Reader | Agilent(Hewlett-Packard) |
| HBCS-7154 | Industrial Digital Bar Code Slot Reader | Agilent(Hewlett-Packard) |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |