DataSheetWiki


HIP2123 fiches techniques PDF

Intersil Corporation - High Frequency Half-Bridge Drivers

Numéro de référence HIP2123
Description High Frequency Half-Bridge Drivers
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





HIP2123 fiche technique
100V, 2A Peak, High Frequency Half-Bridge Drivers with
Rising Edge Delay Timer
HIP2122, HIP2123
The HIP2122 and HIP2123 are 100V, high frequency, half-bridge
MOSFET driver ICs. They are based on the popular ISL2100A and
ISL2101A half-bridge drivers. Like the ISL2100A, two logic
inputs, LI and HI, control both bridge outputs, LO and HO. All logic
inputs are VDD tolerant.
These drivers have a programmable dead-time to insure
break-before-make operation between the high-side and low-side
drivers. The dead-time is adjustable up to 220ns. The internal
logic does not prevent both outputs from turning on
simultaneously if both inputs are high simultaneously for a time
greater than the programmed delay.
A single PWM logic input controls both bridge outputs (HO, LO).
An enable pin (EN), when low, drives both outputs to a low state.
All logic inputs are VDD tolerant and the HIP2122 has CMOS
inputs with hysteresis for superior operation in noisy
environments.
The HIP2122 has hysteretic inputs with thresholds that are
proportional to VDD. The HIP2123 has 3.3V logic/TTL compatible
inputs.
Two package options are provided. The 10 lead 4x4 DFN package
has standard pinouts. The 9 lead 4x4 DFN package omits pin 2 to
comply with 100V conductor spacing per IPC-2221.
Features
• 9 Ld TDFN “B” Package Compliant with 100V Conductor
Spacing Guidelines per IPC-2221
• Break-Before-Make Dead-Time Prevents Shoot-through and is
adjustable up to 220ns
• Bootstrap Supply Max Voltage to 114VDC
• Wide Supply Voltage Range (8V to 14V)
• Supply Undervoltage Protection
• CMOS Compatible Input Thresholds with Hysteresis (HIP2122)
• 1.6Ω/1Ω Typical Output Pull-up/Pull-down Resistance
• On-Chip 1Bootstrap Diode
Applications
• Telecom Half-Bridge DC/DC Converters
• UPS and Inverters
• Motor Drives
• Class-D Amplifiers
• Forward Converter with Active Clamp
Related Literature
FN7668, HIP2120, HIP2121 “100V, 2A Peak, High Frequency
Half-Bridge Drivers with Adjustable Dead Time Control and
PWM Input”
HALF
BRIDGE
PWM
CONTROLLER
HIP2122, HIP2123
VDD
HB
HI
LI
RDT
HO
HS
VSS
EPAD
LO
100V MAX
SECONDARY
CIRCUITS
FEEDBACK
WITH
ISOLATION
FIGURE 1. TYPICAL APPLICATION
200
160
140
120
100
80
60
40
20
8 16 24 32 40 48 56 64
RDT (k)
FIGURE 2. DEAD-TIME vs TIMING RESISTOR
80
December 23, 2011
FN7670.0
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

PagesPages 16
Télécharger [ HIP2123 ]


Fiche technique recommandé

No Description détaillée Fabricant
HIP2120 High Frequency Half-Bridge Drivers Intersil Corporation
Intersil Corporation
HIP2121 High Frequency Half-Bridge Drivers Intersil Corporation
Intersil Corporation
HIP2122 High Frequency Half-Bridge Drivers Intersil Corporation
Intersil Corporation
HIP2123 High Frequency Half-Bridge Drivers Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche