|
|
Número de pieza | V216C1-L02 | |
Descripción | TFT LCD Module | |
Fabricantes | Chi Mei | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de V216C1-L02 (archivo pdf) en la parte inferior de esta página. Total 25 Páginas | ||
No Preview Available ! Issued Date: Mar. 06, 2006
Model No.: V216C1-L02
Preliminary
TFT LCD Preliminary Specification
MODEL NO.: V216C1 - L02
wwwwwwL.C.DjjxTxV HlelacdcDidvdision..ccoomm
AVP
QRA Dept.
Approval
DDIII
Approval
TVHD/PDD
DDII
Approval
DDI
Approval
LCD TV Marketing and Product Management Dept.
Product Manager
1
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version1.0
1 page Issued Date: Mar. 06, 2006
Model No.: V216C1-L02
Preliminary
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
Symbol
TST
TOP
SNOP
VNOP
Value
Min. Max.
-20 +60
0 +50
- 50
- 1.0
Note (1) Temperature and relative humidity range is shown in the figure below.
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
(a) 90 %RH Max. (Ta 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 60 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in your product design to prevent the surface temperature
of display area from being over 60 ºC. The range of operating temperature may degrade in case of
improper thermal management in your product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 500 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
wwwwww..jjxxllccdd..ccoommso that the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10 Storage Range
-40 -20
0 20 40
Temperature (ºC)
60 80
5
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version1.0
5 Page 5. INTERFACE PIN CONNECTION
5.1 TFT LCD MODULE
CN1 Connector Pin Assignment
Issued Date: Mar. 06, 2006
Model No.: V216C1-L02
Preliminary
wwwwww..jjxxllccdd..ccoomm
11
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version1.0
11 Page |
Páginas | Total 25 Páginas | |
PDF Descargar | [ Datasheet V216C1-L02.PDF ] |
Número de pieza | Descripción | Fabricantes |
V216C1-L01 | TFT LCD Module | Chi Mei |
V216C1-L02 | TFT LCD Module | Chi Mei |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |