DataSheetWiki


INK1003 fiches techniques PDF

Greeled Electronic - 3-Channel constant current LED driver

Numéro de référence INK1003
Description 3-Channel constant current LED driver
Fabricant Greeled Electronic 
Logo Greeled Electronic 





1 Page

No Preview Available !





INK1003 fiche technique
Greeled Electronic Ltd
INK1003 IC (256-Gray Level)
Data Sheet Of INK1003 IC Driver
Characteristics
Applications
z 3-Channel constant current LED driver.
z Output current won’t vary with the driving z LED decorative lighting
output voltage.
z Digital Dream Color Led Strip Light
z Wide operating voltage:3.3~5.4V
z Indoor/Outdoor LED video or massage display
z High gray level, 256 gray levels.
z PWM signal generator
z Polarity reverse function makes INK1003 z All kinds of LED point light source
suitable for high power full color LED
z LED strips operate between 5~12V
lighting.
z Low output current deviation:
Between channels in a single chip: ±1 %
Between chips: ±3%
z Data frequency range wide: 400~800KHz
z Schmitt trigger input
z High reliability, ESD susceptibility high:
HBM 8KV
Greeled Electronic LtdGeneralDescription
INK1003 is a constant current LED driver. It is a single line 3-Channel 256 Grey Level Driver.It is
designed for indoor/ outdoor LED displays and decorative LED lighting system. It is suitable for LED
cascading applications. The INK1003 owns 3 output channels, each channel can sink 18.6mA constant
current. INK1003 contains single line data transceiver decoder, data latches, output registers, band gap
reference voltage generator, internal oscillator, and low saturation constant current sinks. The data received
by INK1003 is decoded and then the decoded data is transferred in to the gray level comparator. The output of
the gray level comparator controls the constant output current.
The output polarity reverse function is designed for driving high power LED by adapting the application
circuitry. The single line control scheme reduces the engineering troubles mostly, the special designed input
and output staged of INK1003, make INK1003 survive during output and input pin short with power source or
GND. When 800KHz, it can achieve 1024Pixels cascade connection.
INK1003 is available in both SOP-8 and DIP-8 packages, the operating temperature is -40~85.
  PIN CONFIGURATION
  TYPICAL APPLICATION CIRCUIT
Fig1 SOP-8
 
www.gree-leds.com
1

PagesPages 8
Télécharger [ INK1003 ]


Fiche technique recommandé

No Description détaillée Fabricant
INK1002 RGB LED Greeled Electronic
Greeled Electronic
INK1003 3-Channel constant current LED driver Greeled Electronic
Greeled Electronic
INK1003 3-Channel LED driver CrossChip
CrossChip

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche