DataSheetWiki


HCTS191KMSR fiches techniques PDF

Intersil Corporation - Radiation Hardened Synchronous 4-Bit Up/Down Counter

Numéro de référence HCTS191KMSR
Description Radiation Hardened Synchronous 4-Bit Up/Down Counter
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





HCTS191KMSR fiche technique
HCTS191MS
September 1995
Radiation Hardened
Synchronous 4-Bit Up/Down Counter
Features
Pinouts
• 3 Micron Radiation Hardened CMOS SOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm2/mg
• Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/Bit-
Day (Typ)
• Dose Rate Survivability: >1 x 1012 RAD (Si)/s
• Dose Rate Upset: >1010 RAD (Si)/s 20ns Pulse
• Cosmic Ray Upset Immunity 2 x 10-9 Errors/Bit Day
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
- Standard Outputs - 10 LSTTL Loads
• Military Temperature Range: -55oC to +125oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current Levels Ii 5µA @ VOL, VOH
Description
The Intersil HCTS191MS is a Radiation Hardened asynchro-
nously presettable 4 bit binary up/down synchronous counter.
Presetting the counter to the number on the preset data inputs
(P0 - P3) is accomplished by a low asynchronous parallel load
input (PL). Counting occurs when PL is high, Count Enable (CE)
is low, and the Up/Down (U/D) input is either low for up-counting
or high for down-counting. The counter is incremented or decre-
mented synchronously with the low-to-high transition of the clock.
When an overflow or underflow of the counter occurs, the
Terminal Count output (TC), which is low during counting, goes
high and remains high for one clock cycle. This output can be
used for look-ahead carry in high speed cascading. The TC
output also initiates the Ripple Clock output (RC) which, normally
high, goes low and remains low for the low-level portion of the
clock pulse. These counter can be cascaded using the Ripple
Carry output.
The HCTS191MS utilizes advanced CMOS/SOS technology to
achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCTS191MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
16 LEAD CERAMIC DUAL-IN-LINE METAL SEAL PACKAGE
(SBDIP) MIL-STD-1835 CDIP2-T16
TOP VIEW
P1 1
Q1 2
Q0 3
CE 4
U/D 5
Q2 6
Q3 7
GND 8
16 VCC
15 P0
14 CP
13 RC
12 TC
11 PL
10 P2
9 P3
16 LEAD CERAMIC METAL SEAL FLATPACK PACKAGE
(FLATPACK) MIL-STD-1835 CDFP4-F16
TOP VIEW
P1
Q1
Q0
CE
U/D
Q2
Q3
GND
1 16
2 15
3 14
4 13
5 12
6 11
7 10
89
VCC
P0
CP
RC
TC
PL
P2
P3
TRUTH TABLE
FUNCTION
PL CE U/D
CP
Count Up
HL L
Count Down
HLH
Asynchronous Preset
L
X
X
X
No Change
HHX
X
H = High Level, L = Low Level, X = Immaterial
= Transition from low to high
NOTE: U/D or CE should be changed only when CLOCK (CP)
is high.
Ordering Information
PART NUMBER
HCTS191DMSR
HCTS191KMSR
HCTS191D/Sample
HCTS191K/Sample
HCTS191HMSR
TEMPERATURE RANGE
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
+25oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
580
Spec Number 518621
File Number 2250.2

PagesPages 10
Télécharger [ HCTS191KMSR ]


Fiche technique recommandé

No Description détaillée Fabricant
HCTS191KMSR Radiation Hardened Synchronous 4-Bit Up/Down Counter Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche