DataSheetWiki


HCS360-P fiches techniques PDF

Microchip Technology - KEELOQ CODE HOPPING ENCODER

Numéro de référence HCS360-P
Description KEELOQ CODE HOPPING ENCODER
Fabricant Microchip Technology 
Logo Microchip Technology 





1 Page

No Preview Available !





HCS360-P fiche technique
M
HCS360
Code Hopping Encoder
FEATURES
Security
• Programmable 28/32-bit serial number
• Programmable 64-bit encryption key
• Each transmission is unique
• 67-bit transmission code length
• 32-bit hopping code
• 35-bit fixed code (28/32-bit serial number,
4/0-bit function code, 1-bit status, 2-bit CRC)
• Encryption keys are read protected
Operating
• 2.0-6.6V operation
• Four button inputs
- 15 functions available
• Selectable baud rate
• Automatic code word completion
• Battery low signal transmitted to receiver
• Nonvolatile synchronization data
• PWM and Manchester modulation
Other
• Easy to use programming interface
• On-chip EEPROM
• On-chip oscillator and timing components
• Button inputs have internal pull-down resistors
• Current limiting on LED output
• Minimum component count
Enhanced Features Over HCS300
• 48-bit seed vs. 32-bit seed
• 2-bit CRC for error detection
• 28/32-bit serial number select
• Two seed transmission methods
• PWM and Manchester modulation
• IR modulation mode
Typical Applications
The HCS360 is ideal for Remote Keyless Entry (RKE)
applications. These applications include:
• Automotive RKE systems
• Automotive alarm systems
• Automotive immobilizers
• Gate and garage door openers
• Identity tokens
• Burglar alarm systems
PACKAGE TYPES
PDIP, SOIC
S0
1
S1 2
S2 3
S3 4
8 VDD
7 LED
6 PWM
5 VSS
HCS360 BLOCK DIAGRAM
Oscillator
LED
Reset circuit
LED driver
Controller
Power
latching
and
switching
PWM
EEPROM
Encoder
32-bit shift register
VSS
VDD
Button input port
S3 S2 S1 S0
DESCRIPTION
The HCS360 is a code hopping encoder designed for
secure Remote Keyless Entry (RKE) systems. The
HCS360 utilizes the KEELOQ code hopping technology,
which incorporates high security, a small package
outline and low cost, to make this device a perfect
solution for unidirectional remote keyless entry systems
and access control systems.
The HCS360 combines a 32-bit hopping code
generated by a nonlinear encryption algorithm, with a
28/32-bit serial number and 7/3 status bits to create a
67-bit transmission stream. The length of the
transmission eliminates the threat of code scanning
and the code hopping mechanism makes each
transmission unique, thus rendering code capture and
resend (code grabbing) schemes useless.
KEELOQ is a registered trademark of Microchip Technology Inc.
*Code hopping encoder patents issued in Europe, U. S. A., R. S. A. — US: 5,517,187; Europe: 0459781
© 1996 Microchip Technology Inc.
Preliminary
DS40152C-page 1

PagesPages 24
Télécharger [ HCS360-P ]


Fiche technique recommandé

No Description détaillée Fabricant
HCS360-IP KEELOQ CODE HOPPING ENCODER Microchip Technology
Microchip Technology
HCS360-ISN KEELOQ CODE HOPPING ENCODER Microchip Technology
Microchip Technology
HCS360-P KEELOQ CODE HOPPING ENCODER Microchip Technology
Microchip Technology
HCS360-SN KEELOQ CODE HOPPING ENCODER Microchip Technology
Microchip Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche