DataSheetWiki


OPB811 fiches techniques PDF

OPTEK - Wide Gap Slotted Optical Switch

Numéro de référence OPB811
Description Wide Gap Slotted Optical Switch
Fabricant OPTEK 
Logo OPTEK 





1 Page

No Preview Available !





OPB811 fiche technique
Wide Gap Slotted Optical Switch
OPB800 & OPB810 (L and W Series)
Features:
0.375” (9.525 mm) wide gap
Choice of aperture size
Choice of minimum photocurrent
Choice of opaque or IR transmissive shells
Available for PCBoard mounting or with 24” 26 AWG wires
W Package
Product Photo Here
L Package
Description:
The OPB800L series, PCBoard mounting, of wide gap switch provides the flexibility of a custom device from a
standard product line, while the OPB800W series, remote mounted, switch offers 24” (610 mm) 26 AWG wire
interconnect.
Building from a standard housing that utilizes a 0.375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, discrete shell material and the aperture width.
Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to
visible and near-infrared ambient radiation. Discrete shells, which are exposed on parallel faces inside the device
throat, are made of IR transmissive plastic (for applications where aperture contamination may occur) or of opaque
plastic with aperture openings (for maximum protection against ambient light).
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Non-contact interruptive object sensing
Assembly line automation
Machine automation
Equipment security
Machine safety
Optek Assembly
Phototransistor Output Family
Part Number Guide
OPB 8 X X X X X Z
For “W” series only
Sensor Aperture:
1 — 0.010” (.254 mm)
5 — 0.050” (1.270 mm)
Emitter Aperture:
5 — 0.050” (1.270 mm)
Discrete Shell Material:
0 — Transmissive plastic
Discrete shell
1 — Opaque plastic
Discrete shell
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Note: Assemblies with 0.010” apertures are
currently available with electrical
parameter “A” only.
Wires = 26AWG—24” Long
Mounting configurations:
L — Solder lead termination
W — Wire termination
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 02/2013
Page 1 of 5

PagesPages 5
Télécharger [ OPB811 ]


Fiche technique recommandé

No Description détaillée Fabricant
OPB810 Wide Gap Slotted Optical Switch OPTEK
OPTEK
OPB810L WIDE GAP SLOTTED OPTICAL SWITCHES OPTEK
OPTEK
OPB810W WIDE GAP SLOTTED OPTICAL SWITCHES OPTEK
OPTEK
OPB811 Wide Gap Slotted Optical Switch OPTEK
OPTEK

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche