DataSheetWiki


HCPL0730 fiches techniques PDF

Agilent(Hewlett-Packard) - Dual Channel Low Input Current/ High Gain Optocouplers

Numéro de référence HCPL0730
Description Dual Channel Low Input Current/ High Gain Optocouplers
Fabricant Agilent(Hewlett-Packard) 
Logo Agilent(Hewlett-Packard) 





1 Page

No Preview Available !





HCPL0730 fiche technique
Dual Channel Low Input
Current, High Gain
Optocouplers
Technical Data
H
HCPL-2730 HCPL-0730
HCPL-2731 HCPL-0731
Features
• High Current Transfer Ratio
– 1800% Typical
• Low Input Current
Requirements – 0.5 mA
• Low Output Saturation
Voltage – 0.1 V
• High Density Packaging
• Performance Guaranteed
over Temperature
0°C to 70°C
• LSTTL Compatible
• High Output Current –
60 mA
• Safety Approval
UL Recognized - 2500 V rms
for 1 Minute and
5000 V rms* for 1 minute
CSA Approved
• Available in 8 Pin DIP and
SO-8 Footprint
• MIL-STD-1772 Version
Available (HCPL-5730/5731)
• Surface Mount Gull Wing
Option Available for 8-Pin
DIP (Option 300)
Applications
• Digital Logic Ground
Isolation
• Telephone Ring Detector
• Level Shifting
• EIA RS-232C Line Receiver
• Polarity Sensing
• Low Input Current Line
Receiver - Long Line or Party
Line
• Microprocessor Bus
Isolation
• Current Loop Receiver
• Line Voltage Status Indicator
-Low Input Power
Dissipation
Description
These dual channel optocouplers
contain a separated pair of GaAsP
light emitting diodes optically
coupled to a pair of integrated
high gain photo detectors. They
provide extremely high current
transfer ratio and excellent input-
output common mode transient
immunity. A separate pin for the
photodiodes and first gain stages
(VCC) permits lower output satura-
tion voltage and higher speed
operation than possible with
conventional photodarlington
type optocouplers. In addition,
VCC may be as low as 1.6 V
Functional Diagram
ANODE 1 1
CATHODE 1 2
CATHODE 2 3
ANODE 2 4
8 VCC
7 VO1
6 VO2
5 GND
TRUTH TABLE
LED
VO
ON LOW
OFF HIGH
*5000 V rms/1 minute withstand voltage rating is for Option 020 (HCPL-2730, HCLP-2731) products only.
A 0.1 µF bypass capacitor connected between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1-108
5965-3597E

PagesPages 12
Télécharger [ HCPL0730 ]


Fiche technique recommandé

No Description détaillée Fabricant
HCPL0730 Dual Channel Low Input Current/ High Gain Optocouplers Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL0730 Low Input Current High Gain Split Darlington Optocouplers Fairchild Semiconductor
Fairchild Semiconductor
HCPL0731 Low Input Current High Gain Split Darlington Optocouplers Fairchild Semiconductor
Fairchild Semiconductor
HCPL0738 High Speed CMOS Optocoupler Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche