|
|
Número de pieza | NX5530SA | |
Descripción | InGaAsP MQW-FP LASER DIODE | |
Fabricantes | California Eastern Labs | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NX5530SA (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! LASER DIODE
NX5530SA
1 550 nm InGaAsP MQW-FP LASER DIODE FOR OTDR APPLICATIONS
DESCRIPTION
The NX5530SA is a 1 550 nm Multiple Quantum Well (MQW) structured
Fabry-Perot (FP) laser diode. This device is specified to operate under
pulsed condition and designed for light source of Optical Time Domain
Reflectometer (OTDR).
FEATURES
• High output power
• Long wavelength
PO = 250 mW @ IFP = 1 000 mA*1
C = 1 550 nm
*1 Pulse Conditions: Pulse width (PW) = 10 s, Duty = 1%
Document No. PL10700EJ01V0DS (1st edition)
Date Published January 2008 NS
1 page SAFETY INFORMATION ON THIS PRODUCT
NX5530SA
Warning Laser Beam
Caution GaAs Products
Caution Optical Fiber
A laser beam is emitted from this diode during operation.
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
A glass-fiber is attached on the product. Handle with care.
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet NX5530SA.PDF ] |
Número de pieza | Descripción | Fabricantes |
NX5530SA | InGaAsP MQW-FP LASER DIODE | California Eastern Labs |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |