|
|
Numéro de référence | C50A50Z4 | ||
Description | Surface Mount Termination | ||
Fabricant | Anaren Microwave | ||
Logo | |||
1 Page
Features:
• RoHS Compliant
• 50 Watts
• DC – 2.7 GHz
• Al2O3 Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Outline Drawing
Model C50A50Z4
Description
Surface Mount Termination
50 Watts, 50Ω
The C50A50Z4 is high performance Alumina (Al203) surface mount
termination intended as a low cost alternative to Aluminum Oxide (AlN).
The termination is well suited to all cellular frequency bands such as;
AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating high power 90 degree couplers, and
for use in microstrip circuits. The termination is also RoHS compliant!
General Specifications
Resistive Element
Substrate
Terminal Finish
Thick film
Al2O3 Ceramic
Matte Tin over Nickel Barrier
Operating Temperature -55 to +125°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
50 Watts
Frequency Range:
DC – 2.7 GHz
Return Loss
> 26 dB to 2.2 GHz
> 24 dB to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
C50A50Z4 (097) rev.F pg. 1 of 2
Available on Tape
USA/Canada: (315) 432-8909
and Reel For Pick and
Toll Free: (800) 544-2414
Place Manufacturing.
Europe:
+44 2392-232392
|
|||
Pages | Pages 3 | ||
Télécharger | [ C50A50Z4 ] |
No | Description détaillée | Fabricant |
C50A50Z4 | Surface Mount Termination | Anaren Microwave |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |