DataSheetWiki


HCPL-2731 fiches techniques PDF

Agilent(Hewlett-Packard) - Dual Channel Low Input Current/ High Gain Optocouplers

Numéro de référence HCPL-2731
Description Dual Channel Low Input Current/ High Gain Optocouplers
Fabricant Agilent(Hewlett-Packard) 
Logo Agilent(Hewlett-Packard) 





1 Page

No Preview Available !





HCPL-2731 fiche technique
Dual Channel Low Input
Current, High Gain
Optocouplers
Technical Data
H
HCPL-2730 HCPL-0730
HCPL-2731 HCPL-0731
Features
• High Current Transfer Ratio
– 1800% Typical
• Low Input Current
Requirements – 0.5 mA
• Low Output Saturation
Voltage – 0.1 V
• High Density Packaging
• Performance Guaranteed
over Temperature
0°C to 70°C
• LSTTL Compatible
• High Output Current –
60 mA
• Safety Approval
UL Recognized - 2500 V rms
for 1 Minute and
5000 V rms* for 1 minute
CSA Approved
• Available in 8 Pin DIP and
SO-8 Footprint
• MIL-STD-1772 Version
Available (HCPL-5730/5731)
• Surface Mount Gull Wing
Option Available for 8-Pin
DIP (Option 300)
Applications
• Digital Logic Ground
Isolation
• Telephone Ring Detector
• Level Shifting
• EIA RS-232C Line Receiver
• Polarity Sensing
• Low Input Current Line
Receiver - Long Line or Party
Line
• Microprocessor Bus
Isolation
• Current Loop Receiver
• Line Voltage Status Indicator
-Low Input Power
Dissipation
Description
These dual channel optocouplers
contain a separated pair of GaAsP
light emitting diodes optically
coupled to a pair of integrated
high gain photo detectors. They
provide extremely high current
transfer ratio and excellent input-
output common mode transient
immunity. A separate pin for the
photodiodes and first gain stages
(VCC) permits lower output satura-
tion voltage and higher speed
operation than possible with
conventional photodarlington
type optocouplers. In addition,
VCC may be as low as 1.6 V
Functional Diagram
ANODE 1 1
CATHODE 1 2
CATHODE 2 3
ANODE 2 4
8 VCC
7 VO1
6 VO2
5 GND
TRUTH TABLE
LED
VO
ON LOW
OFF HIGH
*5000 V rms/1 minute withstand voltage rating is for Option 020 (HCPL-2730, HCLP-2731) products only.
A 0.1 µF bypass capacitor connected between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1-108
5965-3597E

PagesPages 12
Télécharger [ HCPL-2731 ]


Fiche technique recommandé

No Description détaillée Fabricant
HCPL-2730 Dual Channel Low Input Current/ High Gain Optocouplers Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-2730 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS Fairchild Semiconductor
Fairchild Semiconductor
HCPL-2730 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS QT Optoelectronics
QT Optoelectronics
HCPL-2730 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche