DataSheetWiki


HCNW4502 fiches techniques PDF

Agilent(Hewlett-Packard) - Single Channel/ High Speed Optocouplers

Numéro de référence HCNW4502
Description Single Channel/ High Speed Optocouplers
Fabricant Agilent(Hewlett-Packard) 
Logo Agilent(Hewlett-Packard) 





1 Page

No Preview Available !





HCNW4502 fiche technique
Single Channel, High Speed
Optocouplers
Technical Data
H
6N135/6
HCNW135/6
HCNW4502/3
HCPL-0452/3
HCPL-0500/1
HCPL-4502/3
Features
• 15 kV/µs Minimum Common
Mode Transient Immunity at
VCM = 1500 V (4503/0453)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8-Pin DIP, SO-8,
Widebody Packages
• Open Collector Output
• Guaranteed Performance
from Temperature: 0°C
to 70°C
• Safety Approval
UL Recognized – 2500 V rms
for 1 minute (5000 V rms for
1 minute for HCNW and
Option 020 devices) per
UL1577
CSA Approved
VDE 0884 Approved
–VIORM = 630 V peak for
HCPL-4503#060
–VIORM = 1414 V peak for
HCNW devices
BSI Certified
(HCNW devices only)
• Dual Channel Version
Available (253X/4534/053X/
0534)
• MIL-STD-1772 Version
Available (55XX/65XX/4N55)
Applications
• High Voltage Insulation
• Video Signal Isolation
• Power Transistor Isolation
in Motor Drives
• Line Receivers
• Feedback Element in
Switched Mode Power
Supplies
• High Speed Logic Ground
Isolation – TTL/TTL, TTL/
CMOS, TTL/LSTTL
• Replaces Pulse Transformers
• Replaces Slow
Phototransistor Isolators
• Analog Signal Ground
Isolation
Description
These diode-transistor optocoup-
lers use an insulating layer
between a LED and an integrated
photodetector to provide elec-
trical insulation between input
and output. Separate connections
for the photodiode bias and
output-transistor collector
increase the speed up to a
hundred times that of a conven-
tional phototransistor coupler by
reducing the base-collector
capacitance.
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
*
7 VB
6 VO
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
VO
ON
OFF
LOW
HIGH
* NOTE: FOR 4502/3, 0452/3,
PIN 7 IS NOT CONNECTED.
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1-16
5965-3605E

PagesPages 17
Télécharger [ HCNW4502 ]


Fiche technique recommandé

No Description détaillée Fabricant
HCNW4502 Single Channel/ High Speed Optocouplers Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCNW4502 High Speed Optocouplers Avago
Avago
HCNW4503 Single Channel/ High Speed Optocouplers Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCNW4503 High Speed Optocouplers Avago
Avago

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche